LOX/methane reusable rocket propulsion at reach with large scale demonstrators tested
Sign Up to like & getrecommendations! Published in 2018 at "Acta Astronautica"
DOI: 10.1016/j.actaastro.2018.06.018
Abstract: Abstract LOX/Methane is currently regarded worldwide as a propellant combination for future expendable and reusable low cost launch vehicles. In order to prepare for future launch systems, Airbus DS (now ArianeGroup) has been investing since… read more here.
Keywords: rocket propulsion; test facility; reusable rocket; test ... See more keywords
Numerical analysis of 1/28 scaled NGNP HTGR reactor building test facility response to depressurization event using GOTHIC
Sign Up to like & getrecommendations! Published in 2018 at "Annals of Nuclear Energy"
DOI: 10.1016/j.anucene.2018.04.030
Abstract: Abstract A depressurized loss of forced cooling (DLOFC) accident is an important type of accident scenario in high temperature gas reactor (HTGR) design, which is initiated by a break in the helium pressure boundary (HPB).… read more here.
Keywords: test facility; reactor building; depressurization;
Developing vanadium redox flow technology on a 9-kW 26-kWh industrial scale test facility: Design review and early experiments
Sign Up to like & getrecommendations! Published in 2018 at "Applied Energy"
DOI: 10.1016/j.apenergy.2018.09.021
Abstract: Abstract Redox Flow Batteries (RFBs) have a strong potential for future stationary storage, in view of the rapid expansion of renewable energy sources and smart grids. Their development and future success largely depend on the… read more here.
Keywords: test facility; redox flow; vanadium redox;
Uncertainty estimation in calibration of instruments of model turbine test facility
Sign Up to like & getrecommendations! Published in 2021 at "Flow Measurement and Instrumentation"
DOI: 10.1016/j.flowmeasinst.2021.101911
Abstract: Abstract The experimental testing of the reduced scale model turbine is an important phase to obtain the performance characteristics of the prototype because the characteristics are difficult to obtain from theoretical calculations. A specially designed… read more here.
Keywords: calibration; test facility; turbine test; model turbine ... See more keywords
Safety systems in the ITER neutral beam test facility
Sign Up to like & getrecommendations! Published in 2019 at "Fusion Engineering and Design"
DOI: 10.1016/j.fusengdes.2018.12.037
Abstract: Abstract SPIDER, the experimental device of the ITER Neutral Beam Test Facility (NBTF) devoted to the study of the ion source, has recently started operation. The construction of MITICA, the full-size prototype of the ITER… read more here.
Keywords: neutral beam; test facility; beam test; iter neutral ... See more keywords
Application of the mirror procedure to the robustness and fault analysis of Divertor Tokamak Test facility
Sign Up to like & getrecommendations! Published in 2021 at "Fusion Engineering and Design"
DOI: 10.1016/j.fusengdes.2021.112437
Abstract: Abstract Due to the critical impact on the plasma control, the reliability of the magnetic diagnostic system in a tokamak should be continuously supervised. A new procedure based on a robust estimation of the expected… read more here.
Keywords: application; divertor tokamak; test facility; procedure ... See more keywords
Beam characterization by means of emission spectroscopy in the ELISE test facility
Sign Up to like & getrecommendations! Published in 2017 at "Plasma Physics and Controlled Fusion"
DOI: 10.1088/1361-6587/aa6584
Abstract: The ELISE (extraction from a large ion source experiment) test facility at IPP Garching hosts a RF H −/D − ion source and an acceleration system. Its target is to demonstrate the performance foreseen for… read more here.
Keywords: test facility; emission spectroscopy; spectroscopy; elise ... See more keywords
Achievement of ITER-relevant accelerated negative hydrogen ion current densities over 1000 s at the ELISE test facility
Sign Up to like & getrecommendations! Published in 2019 at "Nuclear Fusion"
DOI: 10.1088/1741-4326/ab246c
Abstract: The neutral beam heating system for the future international fusion experiment ITER will be based on radiofrequency driven ion sources delivering a large (≈1 × 2 m) and homogeneous negative hydrogen or deuterium ion beam… read more here.
Keywords: test facility; iter; iter relevant; ion ... See more keywords
Momentum bandwidth of the KEK Accelerator Test Facility 2
Sign Up to like & getrecommendations! Published in 2021 at "Physical review accelerators and beams"
DOI: 10.1103/physrevaccelbeams.24.051001
Abstract: Momentum bandwidth is an important characteristic for final focus systems (FFS) of future high-energy colliders. A large momentum bandwidth is a notable feature of the novel local-chromaticity-correction FFS, being demonstrated at the KEK Accelerator Test… read more here.
Keywords: test facility; momentum; momentum bandwidth; accelerator test ... See more keywords
Current Status of Korea Heat Load Test Facility KoHLT-EB for Fusion Reactor Materials
Sign Up to like & getrecommendations! Published in 2017 at "IEEE Transactions on Plasma Science"
DOI: 10.1109/tps.2017.2707569
Abstract: The Korea heat load test facility using electron beam (KoHLT-EB) was constructed and commissioned to perform high heat flux testing on plasma facing components (PFCs), such as ITER blanket first wall, the tungsten divertor, and… read more here.
Keywords: test facility; fusion reactor; test; heat ... See more keywords
Investigation of nozzle flow in high altitude test facility
Sign Up to like & getrecommendations! Published in 2022 at "Advances in Mechanical Engineering"
DOI: 10.1177/16878140211047724
Abstract: A high altitude test facility was developed for the experimental studies on nozzles for various levels of vacuum. The current study is focused on the performance of the nozzle under various altitude condition and to… read more here.
Keywords: test facility; altitude test; facility; high altitude ... See more keywords