A Photopatternable Conjugated Polymer with Thermal-Annealing-Promoted Interchain Stacking for Highly Stable Anti-Counterfeiting Materials.
Sign Up to like & getrecommendations! Published in 2023 at "Advanced materials"
DOI: 10.1002/adma.202303120
Abstract: Photoresponsive polymers can be conveniently used to fabricate anti-counterfeiting materials through photopatterning. However, an unsolved problem is that ambient light and heat can damage anti-counterfeiting patterns on photoresponsive polymers. Herein, we develop photo- and thermostable… read more here.
Keywords: counterfeiting materials; thermal annealing; conjugated polymer; interchain stacking ... See more keywords
Stabilizing the Wettability of Initiated Chemical Vapor Deposited (iCVD) Polydivinylbenzene Thin Films by Thermal Annealing
Sign Up to like & getrecommendations! Published in 2017 at "Advanced Materials Interfaces"
DOI: 10.1002/admi.201700270
Abstract: Maintaining stable surface properties, such as wetting, remains a challenge for many applications of functional coatings. Here, this paper reports a study on the stability of the surface properties of polydivinylbenzene (PDVB). The PDVB thin… read more here.
Keywords: oxidation; icvd pdvb; thermal annealing; wettability ... See more keywords
Organic Solar Cell With Efficiency Over 20% and V OC Exceeding 2.1 V Enabled by Tandem With All‐Inorganic Perovskite and Thermal Annealing‐Free Process
Sign Up to like & getrecommendations! Published in 2022 at "Advanced Science"
DOI: 10.1002/advs.202200445
Abstract: Organic solar cells (OSCs) based on polymer donor and non‐fullerene acceptor achieve power conversion efficiency (PCE) more than 19% but their poor absorption below 550 nm restricts the harvesting of high‐energy photons. In contrast, wide… read more here.
Keywords: cell; organic solar; solar cell; thermal annealing ... See more keywords
Enhancing the physical and structural properties of poly(glycolide‐co‐trimethylene carbonate‐co‐ε‐caprolactone) copolymer fibers
Sign Up to like & getrecommendations! Published in 2022 at "Microscopy Research and Technique"
DOI: 10.1002/jemt.24120
Abstract: Nowadays, due to the methodological needs in the application of internal surgery new methods evolving novel design for surgical suture are recommended. In this work, the effect of cold drawing process and the thermal annealing… read more here.
Keywords: structural properties; physical structural; cold drawing; thermal annealing ... See more keywords
Defect Healing in Graphene via Rapid Thermal Annealing with Polymeric "Nanobandage".
Sign Up to like & getrecommendations! Published in 2022 at "Small"
DOI: 10.1002/smll.202206295
Abstract: Overcoming throughput challenges in current graphene defect healing processes, such as conventional thermal annealing, is crucial for realizing post-silicon device fabrication. Herein, a new time- and energy-efficient method for defect healing in graphene is reported,… read more here.
Keywords: graphene; defect healing; healing graphene; thermal annealing ... See more keywords
Effect of thermal annealing on crystallinity and mechanical strength of textile glass and carbon fiber reinforced in situ polymerized ϵ-caprolactam parts
Sign Up to like & getrecommendations! Published in 2018 at "Microsystem Technologies"
DOI: 10.1007/s00542-017-3317-9
Abstract: Fiber reinforced thermoplastic (FRTP) is a promising material for automobiles, airplanes, construction, home appliances and so on. In situ polymerized polyamide (PA6) is a representative polymer material for FRTP. When ϵ-caprolactam (ϵ-CL) is polymerized in… read more here.
Keywords: strength; crystallinity; crystallinity mechanical; fiber reinforced ... See more keywords
A high-performance TiO2 nanotube supercapacitor by tuning heating rate during H2 thermal annealing
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-018-9654-3
Abstract: TiO2 nanotube is a promising material for supercapacitor electrodes. Thermal annealing has been proved as an effective way enhancing the performance of TiO2 nanotube supercapacitors. However, heating rate, as an important parameter in the thermal… read more here.
Keywords: tio2; performance tio2; thermal annealing; rate ... See more keywords
Effect of thermal annealing on microstructure and optical properties of Zn1−xMgxO thin films grown by hydrothermal method
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-019-01767-2
Abstract: Zn1−xMgxO films were prepared by hydrothermal method to investigate the effect of thermal annealing on the microstructure and optical properties. The results show that the films exhibit mixed cubic-hexagonal phases. With increasing of calcination temperature… read more here.
Keywords: annealing microstructure; hydrothermal method; effect thermal; thermal annealing ... See more keywords
Effect of thermal annealing and cooling rate on CBD grown CdS thin films
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-019-02238-4
Abstract: CdS films were deposited by CBD on a glass substrate by using CdI2 as a Cd+ source, thiourea as an S− source and NH4OH as the complexing agent. The effect of slow and rapid cooling… read more here.
Keywords: effect; effect thermal; thermal annealing; annealing cooling ... See more keywords
Rapid thermal annealing on the atomic layer-deposited zirconia thin film to enhance resistive switching characteristics
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-019-02598-x
Abstract: The resistive switching random access memory (RRAM) device has received a great interest for the next-generation non-volatile memory application, and resistive switching (RS) characteristics are mainly affected by conductive oxygen vacancies ([ V o ··… read more here.
Keywords: atomic layer; switching characteristics; thermal annealing; resistive switching ... See more keywords
Impact of thermal annealing inducing oxidation process on the crystalline powder of In2S3
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-020-03921-7
Abstract: Inorganic two-dimensional semiconductor indium sulfide (In2S3) has recently attracted considerable attention as a buffer material in the field of thin-film photovoltaics, photo electrochemical cells and other energy-related applications. Compared with this growing interest, however, detailed… read more here.
Keywords: inducing oxidation; thermal annealing; oxidation process; crystalline ... See more keywords