Articles with "thermal exposure" as a keyword



Photo from wikipedia

Phase Transformation of Nickel‐Rich Phases in Al–Si Alloy Under Thermal Exposure

Sign Up to like & get
recommendations!
Published in 2020 at "Advanced Engineering Materials"

DOI: 10.1002/adem.202000814

Abstract: Al–11.5Si–xCu–yNi–Mg alloys with different Cu and Ni contents are prepared. The microstructure of the alloy and phase transformation of Al3CuNi are investigated by X‐ray diffraction (XRD), optical microscope, scanning electron microscopy (SEM), transmission electron microscopy… read more here.

Keywords: phase; exposure; microscopy; nickel rich ... See more keywords
Photo from wikipedia

Microstructural and Mechanical Stability of Gradient-Nanostructured Mg-Li Alloy During Thermal Exposure

Sign Up to like & get
recommendations!
Published in 2021 at "JOM"

DOI: 10.1007/s11837-021-04582-5

Abstract: Strain-induced gradient nanostructure formation is an effective method for improving the strength of Mg-Li alloys. However, the microstructural and resulting mechanical stability of gradient-nanostructured Mg-Li alloys during thermal exposure have never been studied, thereby limiting… read more here.

Keywords: gradient nanostructured; thermal exposure; stability gradient; mechanical stability ... See more keywords
Photo from wikipedia

Effect of Long-Term Thermal Exposures on Tensile Behaviors of K416B Nickel-Based Superalloy

Sign Up to like & get
recommendations!
Published in 2020 at "Acta Metallurgica Sinica (English Letters)"

DOI: 10.1007/s40195-020-01075-3

Abstract: The effect of long-term thermal exposure on the tensile behavior of a high W content nickel-based superalloy K416B was investigated. The microstructure and the deformation characteristics were observed by scanning electron microscopy and transmission electron… read more here.

Keywords: microscopy; long term; term thermal; thermal exposure ... See more keywords
Photo from wikipedia

Bistable behaviour and microstructure characterization of carbon fiber/epoxy resin anti-symmetric laminated cylindrical shell after thermal exposure

Sign Up to like & get
recommendations!
Published in 2017 at "Composites Science and Technology"

DOI: 10.1016/j.compscitech.2016.11.019

Abstract: Bistable behaviour and microstructure characterization of carbon fiber/epoxy resin anti-symmetric cylindrical shells after thermal exposure are investigated by experimental method in this paper. The effect of thermal exposure temperature and duration on the curvatures, load-displacement… read more here.

Keywords: exposure; thermal exposure; bistable behaviour; behaviour microstructure ... See more keywords
Photo from wikipedia

Technical note - Thermal exposure of wood in standard fire resistance tests

Sign Up to like & get
recommendations!
Published in 2019 at "Fire Safety Journal"

DOI: 10.1016/j.firesaf.2018.02.002

Abstract: 1 Abstract Recently, standard fire resistance testing has been questioned for combustible products. A part of the comments address the thermal boundary conditions and the different thermal exposure of combustible products in comparison to incombustibles.… read more here.

Keywords: technical note; fire resistance; thermal exposure; standard fire ... See more keywords
Photo from wikipedia

Effect of Ta on microstructural evolution and mechanical properties of a solid-solution strengthening cast Ni-based alloy during long-term thermal exposure at 700 °C

Sign Up to like & get
recommendations!
Published in 2017 at "Journal of Alloys and Compounds"

DOI: 10.1016/j.jallcom.2017.09.194

Abstract: Effect of Ta on microstructural evolution and mechanical properties of a solid-solution strengthening cast Ni-based superalloy, IN617B alloy, considered as a potential candidate for castings in 700 degrees C advanced ultra-supercritical (A-USC) coal-fired power plants,… read more here.

Keywords: long term; term thermal; thermal exposure; solution ... See more keywords
Photo from wikipedia

The effect of stress on primary MC carbides degeneration of Waspaloy during long term thermal exposure

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of Alloys and Compounds"

DOI: 10.1016/j.jallcom.2017.11.166

Abstract: Abstract Microstructure evolution during long-term thermal exposure and stress rupture in Waspaloy was investigated in detail. During thermal and stress exposure, γ′ phase and grain boundary M23C6 carbides kept microstructure stability. The primary MC carbides… read more here.

Keywords: long term; primary carbides; exposure; thermal exposure ... See more keywords
Photo from wikipedia

Thermal exposure risks to mobile tropical marine snails: Are eco-engineered rock pools on seawalls scale-specific enough for comprehensive biodiversity outcomes?

Sign Up to like & get
recommendations!
Published in 2020 at "Marine pollution bulletin"

DOI: 10.1016/j.marpolbul.2020.111237

Abstract: To test the model that eco-engineering plant boxes on seawalls sustain water temperatures within thermal tolerance to maximize tropical marine biodiversity, we conducted acute thermal effects (AET) experiments using intertidal gastropods (Nerita albicilla and Littoraria… read more here.

Keywords: scale specific; marine; thermal exposure; tropical marine ... See more keywords
Photo from wikipedia

Tailoring microstructure and mechanical performance of the graphite-Ni based superalloy brazed combination used for molten salt reactors through thermal exposure

Sign Up to like & get
recommendations!
Published in 2019 at "Materials Characterization"

DOI: 10.1016/j.matchar.2019.109831

Abstract: Abstract The work investigated the effect of high- and medium-temperature thermal exposure on the microstructure and mechanical performance of the graphite/Au/Hastelloy N alloy brazed joint. The microstructure in the joint was studied with the aid… read more here.

Keywords: microstructure mechanical; thermal exposure; performance graphite; used molten ... See more keywords
Photo from wikipedia

Microstructural modification and mechanical characterization for a laser-induced composite coating during thermal exposure

Sign Up to like & get
recommendations!
Published in 2019 at "Surface and Coatings Technology"

DOI: 10.1016/j.surfcoat.2018.10.091

Abstract: Abstract In this work, a composite coating prepared by laser cladding on a Ni-17Mo-7Cr based superalloy was thermally exposed at 1073 K for 240 h. A detailed electron microscopy examination was performed to characterize the microstructure of… read more here.

Keywords: thermal exposure; microstructural modification; aged coating; coating ... See more keywords
Photo from wikipedia

Based on damage caused by microstructure evolution during long-term thermal exposure to analyze and predict creep behavior of Ni-based single crystal superalloy

Sign Up to like & get
recommendations!
Published in 2020 at "AIP Advances"

DOI: 10.1063/5.0018611

Abstract: The creep rupture life of a Ni-based single-crystal superalloy was evaluated under 980 °C/270 MPa after the superalloy was thermally exposed to temperatures of 900 °C, 950 °C, and 1100 °C for 100 h–500 h.… read more here.

Keywords: single crystal; exposure; thermal exposure; damage ... See more keywords