Photo from archive.org
Sign Up to like & get
recommendations!
1
Published in 2017 at "Journal of the Brazilian Society of Mechanical Sciences and Engineering"
DOI: 10.1007/s40430-017-0918-2
Abstract: Studies on rotary engines and their high operation efficiency, in comparison with reciprocating-piston engines, has encouraged further research on different types of these engines. This paper focuses on thermal analysis of a novel rotary engine…
read more here.
Keywords:
novel rotary;
temperature;
modeling novel;
engine ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2020 at "Acta Astronautica"
DOI: 10.1016/j.actaastro.2020.03.028
Abstract: Abstract The problem of the space debris is an important aspect of the on-ground casualty risk reduction. Some articles, like fuel tanks made of titanium alloy, survive during the atmospheric post-mission re-entry and impact the…
read more here.
Keywords:
wind tunnel;
space;
hypersonic wind;
space debris ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2018 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2017.10.012
Abstract: Abstract In this paper, a mathematical model has been formulated to predict the performance of single and double effect solar still by using modified heat and mass transfer correlations. Two similar experimental desalination units (single…
read more here.
Keywords:
double effect;
production;
effect solar;
effect ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Energy"
DOI: 10.1016/j.energy.2018.12.071
Abstract: The demand for reducing fuel consumption and mitigating exhaust fumes accountable for the greenhouse effect push toward developing efficient energy recovery systems. Optimizing the heat recovery process can be achieved by adding multi-recovery stages. In…
read more here.
Keywords:
recovery;
case study;
system;
thermal modeling ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2020 at "Groundwater for Sustainable Development"
DOI: 10.1016/j.gsd.2020.100384
Abstract: Abstract In the present study, a comprehensive approach is introduced to model a passive single-slope solar still. This approach is a proposed combination of Nusselt and Sherwood numbers. Unlike the conventional approach of solar still…
read more here.
Keywords:
solar still;
slope solar;
single slope;
approach ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2021 at "Journal of Cleaner Production"
DOI: 10.1016/j.jclepro.2021.128360
Abstract: Abstract In this research article, thermal modeling is developed for a semitransparent photovoltaic-thermal hybrid collector and the results were experimentally validated under the climatic conditions of Coimbatore, India. The semitransparent photovoltaic-thermal hybrid collector system comprises…
read more here.
Keywords:
water;
cuo nanofluid;
photovoltaic;
thermal modeling ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2019 at "Solar Energy"
DOI: 10.1016/j.solener.2018.12.067
Abstract: Abstract An accurate model describing the electro-thermal behavior of solar modules, subject to varying irradiance conditions, is presented. The model relies on an enhanced version of the popular one-diode model, implementing the temperature dependence of…
read more here.
Keywords:
dynamic electro;
model;
temperature;
thermal modeling ... See more keywords
Photo from academic.microsoft.com
Sign Up to like & get
recommendations!
1
Published in 2021 at "Applied Physics Letters"
DOI: 10.1063/5.0039797
Abstract: As nanoscale electronic devices are being packed into dense three-dimensional arrays, the effects of the thermal environment of the system during device operation become critical, but are not clearly understood. Predicting the temperature evolution using…
read more here.
Keywords:
modeling temperature;
temperature;
experimentally calibrated;
electro thermal ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2019 at "IEEE Access"
DOI: 10.1109/access.2019.2949586
Abstract: Electrically assisted manufacturing (EAM) is a promising and rapidly developing metal processing method. The power supply is a key sub-system for EAM, which needs to be designed properly. This paper proposes the model-based design of…
read more here.
Keywords:
pulse power;
current pulse;
power supply;
power ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2020 at "IEEE Transactions on Electron Devices"
DOI: 10.1109/ted.2020.2998459
Abstract: This article concerns the problem of light-emitting diode (LED) compact thermal modeling. The methods currently used to generate such models either require some proprietary information from a device manufacturer or the resulting model element values…
read more here.
Keywords:
color leds;
compact thermal;
leds comparative;
thermal modeling ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2021 at "IEEE/ASME Transactions on Mechatronics"
DOI: 10.1109/tmech.2020.3014804
Abstract: A key issue with wearable technology today is the popular use of stiff electrical motors to actuate the joints. Although their performance is ideal in terms of power, bandwidth, accuracy, and speed, they do not…
read more here.
Keywords:
coiled actuators;
actuators upper;
characterization twisted;
twisted coiled ... See more keywords