Study on the process of hot gas‐assisted GF/PA5X thermoplastic composites automated tape placement
Sign Up to like & getrecommendations! Published in 2024 at "Polymer Composites"
DOI: 10.1002/pc.28886
Abstract: The thermoplastic composites which in the automated tape placement (ATP) process are directly consolidated and formed in situ. The interlaminar bonding quality of the product is susceptible to the ATP process. Glass fiber‐reinforced bio‐based polyamides… read more here.
Keywords: hot gas; process; peel; placement ... See more keywords
Modeling Shear Behavior of Woven Fabric Thermoplastic Composites for Crash Simulations
Sign Up to like & getrecommendations! Published in 2020 at "Applied Composite Materials"
DOI: 10.1007/s10443-020-09844-0
Abstract: Woven fabric thermoplastic composites possess high specific strength and stiffness along with thermoformability. To utilize the full potential of these materials to achieve better crash-safe designs in automotive structural parts, the measurement of non-linear shear… read more here.
Keywords: woven fabric; fabric thermoplastic; modeling shear; thermoplastic composites ... See more keywords
Residual Strains using Integrated Continuous Fiber Optic Sensing in Thermoplastic Composites and Structural Health Monitoring
Sign Up to like & getrecommendations! Published in 2017 at "Experimental Mechanics"
DOI: 10.1007/s11340-017-0339-2
Abstract: The evolution of spatially resolved internal strain/stress during the manufacturing of thermoplastic composites and subsequent relaxation from water intake are evaluated using an in-situ fiber optic sensor corresponding to a coated optical glass fiber with… read more here.
Keywords: water; fiber; fiber optic; thermoplastic composites ... See more keywords
Effect of processing parameters and void content on mechanical properties and NDI of thermoplastic composites
Sign Up to like & getrecommendations! Published in 2019 at "Composites Part A: Applied Science and Manufacturing"
DOI: 10.1016/j.compositesa.2019.03.035
Abstract: Abstract Several consolidation cycles were performed to study the impact of processing parameters on void content, ultrasonic NDT and mechanical performance of CF/PEEK composites. A series of [+45/−45]4S laminates were manufactured by out-of-autoclave technologies including… read more here.
Keywords: processing parameters; effect processing; parameters void; thermoplastic composites ... See more keywords
Polyaryletherketone (PAEK) thermoplastic composites via in-situ ring opening polymerisation
Sign Up to like & getrecommendations! Published in 2021 at "Composites Science and Technology"
DOI: 10.1016/j.compscitech.2020.108534
Abstract: ABSTRACT This work investigates the synthesis and characterisation of macrocyclic oligomers (MCO) from 4, 4’-difluoro benzophenone and catechol, their ring opening polymerisation, fabrication into carbon fibre reinforced composite materials and depolymerisation. The MCOs are polymerised… read more here.
Keywords: situ ring; ring opening; opening polymerisation; thermoplastic composites ... See more keywords
Co-production of thermoplastic composites with solid residue from enzymatic hydrolysis of recycled paper sludge
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Cleaner Production"
DOI: 10.1016/j.jclepro.2017.06.009
Abstract: Abstract The aim of this study is to enhance the use of agro-industrial byproducts and to address the environmental concerns by a novel method of co-production of thermoplastic composites with a solid residue constituting biorefinery.… read more here.
Keywords: thermoplastic composites; production; paper sludge; production thermoplastic ... See more keywords
Coal-Filler-Based Thermoplastic Composites as Construction Materials: A New Sustainable End-Use Application
Sign Up to like & getrecommendations! Published in 2019 at "ACS Sustainable Chemistry & Engineering"
DOI: 10.1021/acssuschemeng.9b04453
Abstract: This paper reports investigations into coal’s viability as an alternative filler to wood flour in wood plastic composites (WPCs)—a class of materials used in building applications in lieu of pressure-treated wood coal plastic composites (CPCs)… read more here.
Keywords: filler based; thermoplastic composites; based thermoplastic; filler ... See more keywords
Comparison of the impact damage resistance of non-hybrid and intra-ply hybrid carbon/E-glass/polypropylene non-crimp thermoplastic composites
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Reinforced Plastics and Composites"
DOI: 10.1177/0731684418805561
Abstract: This study aims to compare the low-velocity impact and post-impact properties of intra-ply hybrid carbon/E-glass/polypropylene non-crimp thermoplastic composites with non-hybrid carbon/PP and E-glass/PP non-crimp thermoplastic composites. Impact test was performed at four energy levels as… read more here.
Keywords: crimp thermoplastic; impact; intra ply; thermoplastic composites ... See more keywords
Strain rate-dependent crash simulation of woven glass fabric thermoplastic composites
Sign Up to like & getrecommendations! Published in 2022 at "Journal of Reinforced Plastics and Composites"
DOI: 10.1177/07316844211064235
Abstract: Woven fabric thermoplastic composites possess high specific strength and stiffness along with thermoformability. To utilize the full potential of these materials to achieve better crash-safe designs in automotive structural parts, their crash behavior must be… read more here.
Keywords: strain rate; fabric thermoplastic; rate dependent; crash ... See more keywords
Process- and material-induced heterogeneities in recycled thermoplastic composites:
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Thermoplastic Composite Materials"
DOI: 10.1177/0892705720979347
Abstract: A novel recycling solution for thermoplastic composites (TPCs) was recently implemented. The processing steps comprise shredding of TPC offcuts to flakes of a few centimetres, melting and blending ... read more here.
Keywords: induced heterogeneities; heterogeneities recycled; thermoplastic composites; recycled thermoplastic ... See more keywords
Determination of convective heat transfer coefficient for hot gas torch (HGT)-assisted automated fiber placement (AFP) for thermoplastic composites
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Thermoplastic Composite Materials"
DOI: 10.1177/0892705720982363
Abstract: In-situ manufacturing of thermoplastic composites using the automated fiber placement (AFP) process consists of heating, consolidation and solidification steps. During the heating step using hot ga... read more here.
Keywords: thermoplastic composites; placement afp; automated fiber; fiber placement ... See more keywords