LAUSR

About LAUSR
Donate
Contact Us

Follow us:

You are not signed in:

Sign Up!


   Articles with "thrust force" as a keyword



Micro drilling characterization of the carbon and carbon–aramid (hybrid) composites

Sign Up to like & get
recommendations! Published in 2024 at "Polymer Composites"

DOI: 10.1002/pc.28138

Abstract: In this study, micro‐drilling tests were carried out on composite laminates reinforced with hybrid (aramid‐carbon) and carbon fibers. Thrust force, hole quality, tool wear, and temperature parameters were measured and assessed following each drilling test.… read more here.

Keywords: quality; carbon; thrust force; hybrid composites ... See more keywords

Experimental study on ultrasonic vibration‐assisted drilling performance of carbon fiber polyetherketoneketone laminate

Sign Up to like & get
recommendations! Published in 2024 at "Polymer Composites"

DOI: 10.1002/pc.28920

Abstract: Parts made from carbon fiber reinforced polyetherketoneketone (CF/PEKK) primarily use mechanical connections during assembly, where the quality of hole processing directly impacts the connection strength. However, defects like delamination, burrs, and fiber pull‐out frequently occur… read more here.

Keywords: thrust force; performance; ultrasonic vibration; drilling ... See more keywords
Photo from wikipedia

Microstructure Characterization and Performance Evaluation on AA7075 Metal Matrix Composites Using RSM Technique

Sign Up to like & get
recommendations! Published in 2020 at "Arabian Journal for Science and Engineering"

DOI: 10.1007/s13369-020-04752-8

Abstract: Ceramic particles-reinforced casted aluminium matrix composites are extensively used in aircraft and in the manufacturing of automobile components due to its excellent properties such as light weight, high strength and increased hardness. In this present… read more here.

Keywords: matrix; thrust force; matrix composites; metal matrix ... See more keywords

Thrust force evaluation and microstructure characterization of hybrid composites (Al7075/B4C/BN) processed by conventional casting technique

Sign Up to like & get
recommendations! Published in 2019 at "Journal of the Brazilian Society of Mechanical Sciences and Engineering"

DOI: 10.1007/s40430-019-1728-5

Abstract: At present, the research studies in the composite materials are enduring to improve the mechanical and other necessary properties of materials. The need for advanced form of hybrid metal matrix composite has been used in… read more here.

Keywords: hybrid composites; thrust force; technique; al7075 b4c ... See more keywords

Plume flowfield and propulsive performance analysis of a rotating detonation engine

Sign Up to like & get
recommendations! Published in 2018 at "Aerospace Science and Technology"

DOI: 10.1016/j.ast.2018.08.024

Abstract: Abstract Rotating detonation engine is a promising detonation-based propulsion system. In this paper, a series of numerical simulations of H2/air RDE are performed to show the plume flowfield of a RDE in detail and to… read more here.

Keywords: propulsive performance; engine; pressure; thrust force ... See more keywords

Multi-objective optimization of CFRP drilling parameters with a hybrid method integrating the ANN, NSGA-II and fuzzy C-means

Sign Up to like & get
recommendations! Published in 2020 at "Composite Structures"

DOI: 10.1016/j.compstruct.2019.111803

Abstract: Abstract A full factorial experiment is performed for the conventional dry drilling of CFRP with spindle speed, feed rate and point angle as drilling parameters, response variables are thrust force and exit-delamination. Artificial neural network… read more here.

Keywords: delamination; multi objective; thrust force; objective optimization ... See more keywords

Effect of cutting parameters on thrust force, torque, hole quality and dust generation during drilling of GLARE 2B laminates

Sign Up to like & get
recommendations! Published in 2021 at "Composite Structures"

DOI: 10.1016/j.compstruct.2021.113562

Abstract: Abstract The present study investigates the effects of machining parameters and the tool coating during drilling of a GLARE® hybrid aerospace material on the cutting forces, hole quality and the generation of harmful dust particles.… read more here.

Keywords: glare laminates; force torque; thrust force; hole quality ... See more keywords
Photo from wikipedia

Mechanical model for predicting thrust force with tool wear effects in drilling of unidirectional CFRP

Sign Up to like & get
recommendations! Published in 2021 at "Composite Structures"

DOI: 10.1016/j.compstruct.2021.113601

Abstract: Abstract Thrust force is the most influential factor to drill-exit damages in the drilling of carbon fiber reinforced polymer/plastic (CFRP). The accurate prediction of the thrust force is important for drilling process optimization to suppress… read more here.

Keywords: effects drilling; force; tool wear; thrust force ... See more keywords

Investigation of thrust force in drilling polyphthalamide (PPA) composites

Sign Up to like & get
recommendations! Published in 2021 at "Measurement"

DOI: 10.1016/j.measurement.2021.109505

Abstract: Abstract In this study, the drilling process is explored on 30% glass fiber reinforced PPA composite to investigate the influence of drilling parameters on thrust force. HSS, TiN coated HSS and carbide twist drills with… read more here.

Keywords: investigation thrust; force; ppa; thrust force ... See more keywords

Analysis on the multi-dimensional spectrum of the thrust force for the linear motor feed drive system in machine tools

Sign Up to like & get
recommendations! Published in 2017 at "Mechanical Systems and Signal Processing"

DOI: 10.1016/j.ymssp.2016.05.006

Abstract: Abstract The motor thrust force has lots of harmonic components due to the nonlinearity of drive circuit and motor itself in the linear motor feed drive system. What is more, in the motion process, these… read more here.

Keywords: feed drive; drive system; motor; thrust force ... See more keywords

Thrust generation by dielectric barrier discharge plasma actuators in the filamentary discharge regime

Sign Up to like & get
recommendations! Published in 2025 at "Physics of Fluids"

DOI: 10.1063/5.0250849

Abstract: The thrust force generated by dielectric barrier discharge (DBD) plasma actuators is highly dependent on their electrical, geometric, and structural variables. Furthermore, plasma discharge in DBD plasma actuators can occur in two distinct regimes: the… read more here.

Keywords: thrust force; filamentary discharge; plasma actuators; discharge ... See more keywords