Surface characteristics and wear depth profile of the TiN, TiAlN and AlCrN coated stainless steel in dry sliding wear condition
Sign Up to like & getrecommendations! Published in 2017 at "Surfaces and Interfaces"
DOI: 10.1016/j.surfin.2016.10.008
Abstract: Abstract Titanium nitride (TiN), titanium aluminum nitride (TiAlN), aluminum chromium nitride (AlCrN) are hard ceramic coating material. It is coated over stainless steel (SS304) and sliding against Ti–6Al–4V alloy by using cathodic arc deposition (CAD)… read more here.
Keywords: wear depth; tin; tialn; stainless steel ... See more keywords
Mechanical and tribological behavior of Ti/TiN and TiAl/TiAlN coated austempered ductile iron
Sign Up to like & getrecommendations! Published in 2018 at "Thin Solid Films"
DOI: 10.1016/j.tsf.2017.12.014
Abstract: Abstract Bilayer Ti/TiN and TiAl/TiAlN coatings were deposited onto austempered ductile iron (ADI) substrates by cathodic arc deposition in an industrial device. Structure and mechanical properties of the coated samples were comparatively examined. Wear behavior… read more here.
Keywords: tialn; tin tial; tial tialn; coated samples ... See more keywords
Tribological properties of TiN/diamond and TiAlN/diamond bilayer films sliding against carbon steel
Sign Up to like & getrecommendations! Published in 2018 at "Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology"
DOI: 10.1177/1350650117750975
Abstract: In this study, the tribological properties of the monolayer micro-crystalline diamond and nano-crystalline diamond films, TiN/diamond and TiAlN/diamond bilayer films on cemented tungsten carbide substrates are evaluated by dry sliding against the medium carbon steel… read more here.
Keywords: nano crystalline; crystalline diamond; tialn; diamond bilayer ... See more keywords
Milling of an Al/CFRP Sandwich Construction with Non-Coated and TiAlN-Coated Tools
Sign Up to like & getrecommendations! Published in 2020 at "Materials"
DOI: 10.3390/ma13173763
Abstract: In this study, the effect of cutting parameters on the quality of an Al/CFRP sandwich structure (aluminium alloy–carbon fibre reinforced polymer) after milling with uncoated and TiAlN-coated tools was examined. The results of the cutting… read more here.
Keywords: tialn; cfrp sandwich; coated tools; milling cfrp ... See more keywords
Evaluation of Cutting-Tool Coating on the Surface Roughness and Hole Dimensional Tolerances during Drilling of Al6061-T651 Alloy
Sign Up to like & getrecommendations! Published in 2021 at "Materials"
DOI: 10.3390/ma14071783
Abstract: Aluminum alloys are soft and have low melting temperatures; therefore, machining them often results in cut material fusing to the cutting tool due to heat and friction, and thus lowering the hole quality. A good… read more here.
Keywords: surface roughness; tool coating; tool; tin ... See more keywords
Tribological Behaviors of Super-Hard TiAlN Coatings Deposited by Filtered Cathode Vacuum Arc Deposition
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15062236
Abstract: High hardness improves the material’s load-bearing capacity, resulting in the enhancement of tribological properties. However, the high hardness is difficult to achieve for TiAlN coating due to the transformation of the close-packed structure from cubic… read more here.
Keywords: tialn; hardness; vacuum arc; tialn coatings ... See more keywords