Solidified microstructures and elastic modulus of hypo-eutectic and hyper-eutectic TiB2-reinforced high-modulus steel
Sign Up to like & getrecommendations! Published in 2019 at "Acta Materialia"
DOI: 10.1016/j.actamat.2019.06.052
Abstract: Abstract The solidified microstructures and elastic modulus of both hypo-eutectic and hyper-eutectic TiB 2 -reinforced high-modulus steels (HMS) with different TiB 2 fractions were investigated. The solidification sequence for hyper-eutectic liquid HMS was as follows:… read more here.
Keywords: tib; solidified microstructures; hyper eutectic; tib particles ... See more keywords
Microstructural investigation of spark plasma sintered TiB2 ceramics with Si3N4 addition
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.04.171
Abstract: Abstract Monolithic TiB 2 and TiB 2 –5 wt% Si 3 N 4 ultrahigh temperature ceramics were fabricated by spark plasma sintering (SPS) at 1900 °C for 7 min under 40 MPa. The addition of Si 3 N 4… read more here.
Keywords: addition; spark plasma; microstructural investigation; investigation spark ... See more keywords
Investigation of AlN addition on the microstructure and mechanical properties of TiB2 ceramics
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.05.196
Abstract: Abstract TiB 2 ceramics with AlN addition were hot pressed at the temperature of 1800 °C under a load of 30 MPa for 1 h to investigate the effect of AlN particles addition as a sintering aid on… read more here.
Keywords: tib; mechanical properties; aln addition; addition ... See more keywords
Safety Indices of Ultrasound: Adherence to Recommendations and Awareness During Routine Obstetric Ultrasound Scanning.
Sign Up to like & getrecommendations! Published in 2020 at "Ultraschall in der Medizin"
DOI: 10.1055/a-1074-0722
Abstract: PURPOSE To analyze bioeffect safety indices and assess how often operators look at these indices during routine obstetric ultrasound. MATERIALS AND METHODS Automated analysis of prospectively collected data including video recordings of full-length ultrasound scans… read more here.
Keywords: bioeffect safety; obstetric ultrasound; safety; safety indices ... See more keywords
Effect of aging on microstructure and wear resistance of Ti-55511/BN composite coating
Sign Up to like & getrecommendations! Published in 2020 at "Surface Engineering"
DOI: 10.1080/02670844.2020.1840697
Abstract: ABSTRACT In situ synthesized TiN and TiB reinforced metal matrix composite coating was fabricated on Ti-55511 by laser cladding with Ti-55511/BN powder mixture (2 wt-% BN). Results indicated that coating was mainly composed of TiB,… read more here.
Keywords: wear resistance; aging microstructure; composite coating; effect aging ... See more keywords
Mechanical, thermal, electrical, and corrosion properties of microwave-sintered Ti-0.8Ni-0.3Mo/TiB composites
Sign Up to like & getrecommendations! Published in 2023 at "Physica Scripta"
DOI: 10.1088/1402-4896/acd6c5
Abstract: In this study, Titanium boride (TiB) reinforced Ti-0.8Ni-0.3Mo/XTiB (X = 5, 10, 15, and 20 wt%) composites were successfully fabricated by microwave sintering assisted powder metallurgy process. Scanning electron microscopy (SEM) coupled with energy-dispersive spectroscopy… read more here.
Keywords: tib; microscopy; 8ni 3mo; tib composites ... See more keywords
Formation of bulk titanium boride (TiB) nano-ceramic with Fe–Mo addition by electric-field-activated-sintering
Sign Up to like & getrecommendations! Published in 2017 at "Journal of the American Ceramic Society"
DOI: 10.1111/jace.15121
Abstract: The present work is focused on optimization of Fe-Mo content, which is essential for transient liquid phase formation and densification, during in-situ reaction sintering of nanostructured titanium boride (TiB) in the bulk form. The principle… read more here.
Keywords: titanium boride; boride tib; formation; tib nano ... See more keywords
In Situ Ti6Al4V/TiB Composites Prepared by Hydrogen-Assisted Sintering of Blends Containing TiH2 and Ball-Milled Ti+TiB2 Powders
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15031049
Abstract: In the present study, 98.6–99.5% dense in situ reinforced Ti6Al4V/TiB composites were manufactured with a newly developed approach based on hydrogen-assisted blended elemental powder metallurgy (BEPM). The approach includes the activation milling of titanium powder… read more here.
Keywords: tib; situ ti6al4v; ti6al4v tib; tib composites ... See more keywords