Tribological Properties of HVOF-Sprayed TiB2-NiCr Coatings with Agglomerated Feedstocks
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-018-0714-2
Abstract: Boride materials have drawn great attention in surface engineering field, owing to their high hardness and good wear resistance. In our previous work, a plasma-sprayed TiB2-based cermet coating was deposited, but the coating toughness was… read more here.
Keywords: nicr coating; sprayed tib2; tib2; tib2 nicr ... See more keywords
Experimental Parametric Investigation of Electrochemical Drilling of AA6061-TiB2 In Situ Composites
Sign Up to like & getrecommendations! Published in 2019 at "Journal of The Institution of Engineers (India): Series C"
DOI: 10.1007/s40032-019-00529-7
Abstract: The composite material manufacturing via in situ route is a popular method for developing the greater mechanical properties by reinforcing smaller volume of the ceramic phases. Electrochemical machining is widely employed for drilling smaller hole,… read more here.
Keywords: electrochemical drilling; situ; experimental parametric; material ... See more keywords
Comparative investigation of microstructure, mechanical properties and strengthening mechanisms of Al-12Si/TiB2 fabricated by selective laser melting and hot pressing
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.06.225
Abstract: Abstract Near-fully dense Al-12Si matrix composites reinforced with TiB2 ceramic particles (2 wt%) were successfully fabricated by selective laser melting (SLM) and hot pressing (HP) of powder mixtures. TiB2 ceramic particles are homogeneously distributed in the… read more here.
Keywords: selective laser; fabricated selective; 12si tib2; tib2 ... See more keywords
Wear behavior and mechanism of TiB2-based ceramic inserts in high-speed cutting of Ti6Al4V alloy
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.12.041
Abstract: Abstract Starting from TiB2, Mo, Co, and C powders, TiB2-based ceramics for cutting tools were prepared by hot-pressing at 1900 °C. The densification, microstructure and mechanical properties of TiB2–Mo–Co and TiB2–Mo–Co–C samples were evaluated. More importantly,… read more here.
Keywords: ti6al4v alloy; wear behavior; tib2; tib2 based ... See more keywords
Preparation and characterization of NiAl–TiC–TiB2 intermetallic matrix composite coatings by atmospheric plasma spraying of SHS powders
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.01.052
Abstract: Abstract NiAl–TiC–TiB2 intermetallic matrix composite coatings with various TiC–TiB2 contents were fabricated by depositing self-propagating high-temperature synthesized (SHS) NiAl–TiC–TiB2 powders using atmospheric plasma spraying (APS) technique. The preparation process was carefully investigated and the effects… read more here.
Keywords: nial tic; tic tib2; tib2 intermetallic; tib2 ... See more keywords
Preparation of composite powders containing TiB2 and ZrB2 particles through combustion synthesis of TiO2–ZrO2–B2O3–Mg system
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.09.254
Abstract: Abstract Composite powders containing TiB2 and ZrB2 particles were successfully prepared through combustion synthesis of (2-x)TiO2–xZrO2–2B2O3–(10 + y)Mg system. Results showed increase in the x-value from 0 to 2 mol and y-value from 0 to 2.5 mol didn't have… read more here.
Keywords: system; tib2; tio2; tib2 zrb2 ... See more keywords
Enhancement on high-temperature microwave absorption properties of TiB2–MgO composites with multi-interfacial effects
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.10.008
Abstract: Abstract TiB2–MgO microwave absorbing materials with TiB2 as the absorber, MgO as the matrix are prepared by spark plasma sintering (SPS). The influences of commercial TiB2 content and sintering temperature on dielectric and microwave absorption… read more here.
Keywords: temperature; high temperature; tib2; microwave absorption ... See more keywords
Microstructure and mechanical behaviour of transient liquid phase spark plasma sintered B4C–SiC–TiB2 composites from a B4C–TiSi2 system
Sign Up to like & getrecommendations! Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.12.180
Abstract: Abstract Almost fully-dense B4C–SiC–TiB2 composites with a high combination of strength and toughness were prepared through in situ reactive spark plasma sintering using B4C and TiSi2 as raw materials. The densification, microstructure, mechanical properties, reaction,… read more here.
Keywords: tib2; spark plasma; tib2 composites; b4c sic ... See more keywords
Microstructural characterization of TiB2–SiC–BN ceramics prepared by hot pressing
Sign Up to like & getrecommendations! Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2021.07.080
Abstract: Abstract This research intended to evaluate the discrete and cumulative impacts of hexagonal SiC and BN additives on the microstructural features and consolidation behavior of TiB2-based materials. All specimens were sintered at the same hot-pressing… read more here.
Keywords: hot pressing; sic hbn; tib2; tib2 sic ... See more keywords
Microstructure and mechanical behavior of spark plasma sintered TiB2/Fe-15Cr-8Al-20Mn composites
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.03.113
Abstract: Abstract Fe-15Cr-8Al-20Mn matrix composites with varying volume fractions of TiB2 (15–30 vol%) were fabricated by the combination of mechanical alloying (MA) and spark plasma sintering (SPS). The influence of TiB2 particulate content on the microstructure and… read more here.
Keywords: 8al 20mn; tib2; microstructure mechanical; spark plasma ... See more keywords
Hot deformation behavior and mechanism of hybrid aluminum-matrix composites reinforced with micro-SiC and nano-TiB2
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.04.223
Abstract: Abstract The hot compression tests of hybrid aluminum-matrix composites reinforced with micro-SiC and nano-TiB2 were performed at deformation temperature of 350–500 °C and strain rates of 0.001-1s−1 on Gleeble-3500 system. The corresponding deformed microstructures were characterized… read more here.
Keywords: hybrid aluminum; microscopy; aluminum matrix; tib2 ... See more keywords