Refining and Reinforcing Effects of In Situ AlN–TiN–TiB2/Al Composite Refiner on Aluminum†
Sign Up to like & getrecommendations! Published in 2017 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201600486
Abstract: Typical Al–Ti–B master alloys are good inoculant for aluminum alloys, which have shown obvious dependence on some alloying elements. In this work, in situ AlN–TiN–TiB2/Al composite refiner was successfully prepared by nitrogen alloying based on… read more here.
Keywords: aln tin; tin; tib2 composite; tin tib2 ... See more keywords
Electroless nickel-boron coating on B4C-Nano TiB2 composite powders
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Refractory Metals and Hard Materials"
DOI: 10.1016/j.ijrmhm.2018.05.012
Abstract: Abstract B4C-TiB2 nanocomposites have high hardness of boron carbide and high strength and toughness of titanium diboride. One of the most important problems in adding TiB2 powder to B4C powder is its lack of uniform… read more here.
Keywords: b4c nano; tib2 composite; powder; boron ... See more keywords
Mechanical and tribological properties of Ni-W-TiB2 composite coatings
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.06.044
Abstract: Abstract Pure Ni, Ni-W alloy, and Ni–W–TiB2 composite coatings were prepared on the copper substrate by electrodeposition technique. Surface morphology and elemental composition of as prepared samples were observed and analyzed by scanning electron microscopy… read more here.
Keywords: tribological properties; mechanical tribological; composite coatings; tib2 composite ... See more keywords
Fabrication and microstrain evolution of Al-TiB2 composite coating by cold spray deposition
Sign Up to like & getrecommendations! Published in 2019 at "Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications"
DOI: 10.1177/1464420717690559
Abstract: This paper investigates the microstructure evolution of Al-TiB2 coatings prepared by cold spraying. In situ Al-TiB2 composite powders containing uniformly distributed titanium diboride (TiB2) particles with a size range of 5–100 nm in the Al matrix… read more here.
Keywords: cold spray; tib2; tib2 composite; composite coating ... See more keywords
Compressive Behavior of Al-TiB2 Composite Foams Fabricated under Increased Pressure
Sign Up to like & getrecommendations! Published in 2021 at "Materials"
DOI: 10.3390/ma14175112
Abstract: The application of increased pressure was used as a strategy to investigate the effect of different cell structures on the mechanical properties of Al-TiB2 composite foams. In situ Al-xTiB2 (x = 5, 10 wt.%) composites… read more here.
Keywords: composite foams; increased pressure; tib2 composite; cell size ... See more keywords