Sign Up to like & get
recommendations!
0
Published in 2020 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2020.145264
Abstract: Abstract Ti powders, Si powders, and sucrose as a carbonaceous precursor were used to prepare Ti-Si-C composite powders by a spray-drying/precursor-pyrolysis technology. Ti-Si-C composite coatings were in-situ synthesized by reactive plasma spraying of Ti-Si-C composite…
read more here.
Keywords:
ti5si3 tic;
composite coatings;
reactive plasma;
microstructure properties ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2021 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2020.148794
Abstract: Abstract FeMnCrNiCo + x(TiC) composite high-entropy alloy (HEA) coatings were manufactured by laser cladding. Then the small punch and wear experiments at room temperature were conducted. The phases and microstructures of the composite HEA coatings were characterized…
read more here.
Keywords:
entropy alloy;
composite high;
fracture wear;
femncrnico tic ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Advanced Powder Technology"
DOI: 10.1016/j.apt.2019.02.013
Abstract: Abstract The purpose of this study was to investigate mechanical properties, microstructure and sintering behavior of ultrafine grained Ti5Si3-TiC composite synthesized by mechanically activated self-propagating high-temperature synthesis method. For this purpose, the composite was sintered…
read more here.
Keywords:
grained ti5si3;
tic composite;
mechanical properties;
microstructure ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2021 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2020.08.020
Abstract: Abstract A novel SiC-20 vol% TiC composite prepared via a two-step sintering technique using 6.5 vol% Y2O3-Sc2O3-MgO exhibited high deformation (60 %) on hot forging attributed to the high-temperature plasticity of TiC (ductile to brittle transition temperature…
read more here.
Keywords:
mechanical thermal;
deformation;
hot forged;
tic composite ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2023 at "Journal of Applied Physics"
DOI: 10.1063/5.0147988
Abstract: The Hugoniot elastic limit (HEL) is widely adopted as an important criterion for assessing the dynamic strength of materials, representing the transition stress from elastic to plastic response prior to failure under shock compression. Nano-polycrystalline…
read more here.
Keywords:
elastic limit;
hugoniot elastic;
tic composite;
diamond tic ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
3
Published in 2022 at "Surface Topography: Metrology and Properties"
DOI: 10.1088/2051-672x/ac5c67
Abstract: The Ni–GO–TiC nano-composite coating was prepared by scanning jet electrodeposition. The morphologies and microstructures of the composite coating were analyzed by FESEM and XRD, and the wear and corrosion resistance of the composite coating were…
read more here.
Keywords:
composite coating;
corrosion resistance;
resistance tic;
tic composite ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2022 at "Materials"
DOI: 10.3390/ma15248941
Abstract: The application of titanium and its alloys under friction conditions is severely restricted, owing to their poor wear resistance. The paper presents the results of studies of the composition, microstructure, and tribological properties of Ti-TiC-based…
read more here.
Keywords:
titanium alloys;
properties tic;
tic composite;
composite coatings ... See more keywords