Microstructure and refinement performance of Al-Ti-C master alloy: Effect of excess Ti on the growth and nucleating ability of TiC particles
Sign Up to like & getrecommendations! Published in 2017 at "Metals and Materials International"
DOI: 10.1007/s12540-017-6716-7
Abstract: Al-5Ti-0.2C, Al-0.8Ti-0.2C, Al-8Ti-2C, and Al-10Ti master alloys were prepared and used to investigate the influence of excess Ti on the growth of TiC particles and its ability to nucleate Al-grains. The results of a microstructure… read more here.
Keywords: master; alloy; excess growth; master alloy ... See more keywords
Microstructure evolution during the liquid-liquid phase transformation of Al-Bi alloys under the effect of TiC particles
Sign Up to like & getrecommendations! Published in 2017 at "Acta Materialia"
DOI: 10.1016/j.actamat.2017.02.071
Abstract: Abstract Solidification experiments were carried out for Al-Bi alloys with the addition of TiC. It is demonstrated that the average size of the Bi-rich minority phase particles (MPPs) shows a tendency of keeping constant, increasing,… read more here.
Keywords: phase transformation; tic particles; microstructure evolution; liquid ... See more keywords
Mechanically activated combustion synthesis of Fe3Al composite powders reinforced with sub-micrometer TiC particles
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.05.145
Abstract: Abstract The aim of this work was to develop a process to synthesize Fe3Al matrix composite reinforced with nano scale TiC particles from pure elemental powders as reactants, employing combustion synthesis. The effects of particle… read more here.
Keywords: composite powders; tic particles; fe3al; combustion synthesis ... See more keywords
Microstructure, mechanical and thermal properties of Ni matrix composites reinforced with high-volume TiC
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.04.132
Abstract: Abstract Composites with a high ceramic content (60 vol% TiC) and residual porosity below 1.9% were fabricated through liquid infiltration at 1515 °C under argon atmosphere. Scanning electron microscopy revealed a homogeneous distribution of the matrix phases… read more here.
Keywords: microstructure mechanical; properties matrix; tic particles; matrix composites ... See more keywords
Thermal stability and evolution of microstructures induced by He irradiation in W–TiC alloys
Sign Up to like & getrecommendations! Published in 2018 at "Nuclear materials and energy"
DOI: 10.1016/j.nme.2018.02.003
Abstract: Abstract Dispersion-strengthened W alloys, W-1%TiC and W-2%TiC, were fabricated by spark plasma sintering (SPS). The thermal stabilities of the secondary-phase TiC particles and microstructures in the W alloys during thermal treatments from 100 to 1000 °C… read more here.
Keywords: tic alloys; alloys thermal; stability evolution; evolution microstructures ... See more keywords
Analysis on microstructure and wear resistance of TiC particles reinforced 1Cr12Ni3Mo2V matrix composites processed by laser stereo forming
Sign Up to like & getrecommendations! Published in 2019 at "AIP Advances"
DOI: 10.1063/1.5100127
Abstract: Based on the laser stereo forming technology, the 1Cr12Ni3Mo2V matrix composite specimens with different TiC particles (volume fraction of 0%, 10% and 20%) have been made by controlling the iron-base powder and TiC powder feeding… read more here.
Keywords: 1cr12ni3mo2v matrix; stereo forming; wear resistance; laser stereo ... See more keywords
Effect of tempering temperatures on microstructures and properties of 0.28C–0.22Ti wear-resistant steel
Sign Up to like & getrecommendations! Published in 2018 at "Materials Science and Technology"
DOI: 10.1080/02670836.2017.1361147
Abstract: ABSTRACT The microstructures and properties of a 0.28C–0.22Ti low-alloy wear-resistant steel at different temperatures from 200 to 600°C was experimentally studied. It is shown that the wear resistance of the steel is not monotone changing… read more here.
Keywords: 28c 22ti; properties 28c; microstructures properties; steel ... See more keywords
Effects of Process Parameters on Geometrical Characteristics and Microstructure of TiC Particle-Reinforced Co50 Alloy by Laser Cladding
Sign Up to like & getrecommendations! Published in 2021 at "Advances in Materials Science and Engineering"
DOI: 10.1155/2021/8898693
Abstract: Laser cladding of Co50 alloy coating and Co50 composite coatings doped with 10, 20, and 30 wt.% TiC particles was performed on the H13 steel surface. The effects of TiC concentration on the phase composition,… read more here.
Keywords: surface; co50 alloy; laser cladding; tic particles ... See more keywords
Mechanical, electrical, and corrosion behavior of AA6063/TiC composites synthesized via stir casting route
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Research"
DOI: 10.1557/jmr.2016.503
Abstract: This study investigates the synthesis, characterization, and corrosion behavior of AA6063 composites with the inclusion of micron-sized titanium carbide (TiC) particles with different weight percentages. AA6063/TiC particulate composites containing 0, 3, 6, 9, and 12… read more here.
Keywords: stir casting; behavior aa6063; corrosion; aa6063 tic ... See more keywords
Microstructure, Corrosion and Mechanical Properties of TiC Particles/Al-5Mg Composite Fillers for Tungsten Arc Welding of 5083 Aluminum Alloy
Sign Up to like & getrecommendations! Published in 2019 at "Materials"
DOI: 10.3390/ma12183029
Abstract: A semi-solid stir casting mixed multi-pass rolling process was successfully employed to manufacture TiCp/Al-5Mg composite filler wires with different contents of TiC particles. The 5083-H116 aluminum alloys were joined by tungsten inert gas (TIG) using… read more here.
Keywords: corrosion mechanical; corrosion; mechanical properties; 5mg composite ... See more keywords
Characterization of the Structure, Mechanical Properties and Erosive Resistance of the Laser Cladded Inconel 625-Based Coatings Reinforced by TiC Particles
Sign Up to like & getrecommendations! Published in 2021 at "Materials"
DOI: 10.3390/ma14092225
Abstract: The article presents research in the field of laser cladding of metal-matrix composite (MMC) coatings. Nickel-based superalloys show attractive properties including high tensile strength, fatigue resistance, high-temperature corrosion resistance and toughness, which makes them widely… read more here.
Keywords: laser cladding; resistance; structure; inconel 625 ... See more keywords