Preliminary study to investigate the distribution and effects of certain metals after inhalation of welding fumes in mice
Sign Up to like & getrecommendations! Published in 2022 at "Environmental Science and Pollution Research"
DOI: 10.1007/s11356-022-19234-7
Abstract: The most important welding processes used are the gas metal arc (GMA) welding, the tungsten inert gas (TIG) welding, and the manual metal arc (MMA) welding processes. The goal of our investigation was to monitor… read more here.
Keywords: tig; mma; tig stainless; steel ... See more keywords
Creep Deformation and Rupture Behavior of P92 Steel Weld Joint Fabricated by NG-TIG Welding Process
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04157-1
Abstract: The creep deformation and rupture behavior of P92 steel weld joint fabricated by narrow-gap TIG (NG-TIG) welding process have been investigated at 923 K over a stress range of 80-140 MPa. The prior-austenite grain size, M23C6 precipitate… read more here.
Keywords: deformation rupture; tig; weld joint; rupture ... See more keywords
Microstructural Characteristics of Wire Arc Additive Manufacturing with Inconel 625 by Super-TIG Welding
Sign Up to like & getrecommendations! Published in 2020 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-020-01915-x
Abstract: Nowadays, the implementation of additive manufacturing (AM) is rapidly growing in various sectors. Many manufacturing industries are demanding an increase in the size of the AM parts. Wire arc additive manufacturing (WAAM) offers a high… read more here.
Keywords: wire arc; tig welding; super tig; tig ... See more keywords
Effect of Ni Interlayer on Cavitation Erosion Resistance of NiTi Cladding by Tungsten Inert Gas (TIG) Surfacing Process
Sign Up to like & getrecommendations! Published in 2019 at "Acta Metallurgica Sinica (English Letters)"
DOI: 10.1007/s40195-019-00947-7
Abstract: The NiTi cladding with/without Ni interlayer was prepared on stainless steel (SS) by tungsten inert gas (TIG) surfacing process, aiming at achieving good cavitation erosion resistance. The ranking according to the cavitation erosion resistance is… read more here.
Keywords: erosion resistance; tig; cavitation erosion;
Influence of welding parameters on the IMCs and the mechanical properties of Ti/Al butt joints welded by MIG/TIG double-sided arc welding-brazing
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.03.119
Abstract: Abstract Sound welding-brazing butt joints of TiAl6V4 and 5A06 with excellent front and back appearance were obtained by MIG/TIG double-sided arc (DSA) welding-brazing. The relationships between the main welding parameters such as welding speed, TIG… read more here.
Keywords: tig double; butt joints; mig tig; welding brazing ... See more keywords
Suppression mechanism of weld appearance defects in tandem TIG welding by numerical modeling
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Materials Research and Technology"
DOI: 10.1016/j.jmrt.2021.06.042
Abstract: Abstract In high-speed tungsten inert gas (TIG) welding, the premature solidification of liquid metal in low-temperature zone of molten pool results in the formation of weld appearance defects (WADs) such as undercut and humping weld.… read more here.
Keywords: liquid metal; molten pool; tig welding; tig ... See more keywords
Effects of graphene nanoplates on microstructures and mechanical properties of NSA-TIG welded AZ31 magnesium alloy joints
Sign Up to like & getrecommendations! Published in 2017 at "Transactions of Nonferrous Metals Society of China"
DOI: 10.1016/s1003-6326(17)60149-3
Abstract: Abstract The effects of graphene nanoplates (GNPs) on the microstructures and mechanical properties of nanoparticles strengthening activating tungsten inert gas arc welding (NSA-TIG) welded AZ31 magnesium alloy joints were investigated. It was found that compared… read more here.
Keywords: graphene nanoplates; flux; tig; effects graphene ... See more keywords
Clinical study on the safety and efficacy of high-dose tigecycline in the elderly patients with multidrug-resistant bacterial infections
Sign Up to like & getrecommendations! Published in 2020 at "Medicine"
DOI: 10.1097/md.0000000000019466
Abstract: Abstract Multidrug-resistant bacterial (MDRB) infections have been difficult to treat clinically. Tigecycline (TIG) has several advantages, especially in the treatment of severe infections. Many clinicians have considered increasing the TIG dose to improve the efficacy… read more here.
Keywords: multidrug resistant; tig; efficacy; elderly patients ... See more keywords
A Comparative Analysis among Quenched, Tempered, and Stepped Cooled TIG Welded SS-304 Plates Based on Tensile Strength, Hardness, and Microstructural Appearance
Sign Up to like & getrecommendations! Published in 2023 at "Advances in Materials Science and Engineering"
DOI: 10.1155/2023/5523162
Abstract: The present experimental work critically analyses the changes in microstructural orientation and mechanical properties of TIG (tungsten inert gas) welded AISI-304 (SS) plates which have undergone through various heat treatments. The characteristics of heat-treated samples… read more here.
Keywords: 304 plates; sample; tensile strength; hardness ... See more keywords
Computation of residual stresses, distortion, and thermogravimetric analysis of Inconel 625 weld joints
Sign Up to like & getrecommendations! Published in 2020 at "Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science"
DOI: 10.1177/0954406220974058
Abstract: In the current investigation, Inconel 625 weld joints were fabricated by Activated tungsten inert gas (A-TIG) and Tungsten inert gas (TIG) welding techniques. The joint configurations employed square butt and V groove edge preparations. Residual… read more here.
Keywords: weld joints; distortion; tig; residual stresses ... See more keywords
Analysis of Mechanical, Microstructural Properties and Weld Morphology of A-TIG Welded AH-36 Marine-Grade Steels with Oxide and Duplex Flux Coating
Sign Up to like & getrecommendations! Published in 2021 at "International Journal of Automotive and Mechanical Engineering"
DOI: 10.15282/ijame.18.3.2021.22.0699
Abstract: The current study investigates the metallurgical, mechanical properties and weld morphology of AH36 marine grade steel (with a thickness of 8 mm) by activated-tungsten inert gas (A-TIG) butt joints, with the application of different fluxes… read more here.
Keywords: weld morphology; duplex flux; tig; properties weld ... See more keywords