Superlubricity achieved with TiN coatings via the in situ formation of a carbon-based film at the sliding interfaces
Sign Up to like & getrecommendations! Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2021.08.229
Abstract: Abstract This work aimed to develop an efficient lubricant for physical vapor-deposited TiN coatings on steel by adding cyclopropane-carboxylic acid (CPCa) to PAO4 base oil to enhance boundary lubrication. Results showed that an ultralow coefficient… read more here.
Keywords: carbon based; situ formation; tin coatings; formation carbon ... See more keywords
A novel method for in-situ synthesized TiN coatings by plasma spray-physical vapor deposition
Sign Up to like & getrecommendations! Published in 2018 at "Materials Letters"
DOI: 10.1016/j.matlet.2018.01.068
Abstract: Abstract As a novel process, the plasma spray-physical vapor deposition technology was used to in-situ synthesize the TiN coatings on the Ti-6Al-4V alloy. Due to its high power input and very low pressure, relatively pure… read more here.
Keywords: physical vapor; plasma spray; vapor deposition; spray physical ... See more keywords
Sand particle erosion resistance of the multilayer gradient TiN/Ti coatings on Ti6Al4V alloy
Sign Up to like & getrecommendations! Published in 2019 at "Surface and Coatings Technology"
DOI: 10.1016/j.surfcoat.2018.08.066
Abstract: Abstract Multilayer gradient TiN/Ti (MLG-TiN/Ti) and multilayer TiN/Ti (ML-TiN/Ti) coatings with different layer numbers were deposited on Ti6Al4V alloy by filtered cathodic vacuum arc technique (FCVA) to improve the erosion resistance of the substrates. Scan… read more here.
Keywords: mlg tin; tin coatings; erosion; erosion resistance ... See more keywords
The effect of N+ ion-implantation on the corrosion resistance of HiPIMS-TiN coatings sealed by ALD-layers
Sign Up to like & getrecommendations! Published in 2019 at "Surface and Coatings Technology"
DOI: 10.1016/j.surfcoat.2019.05.055
Abstract: Abstract Plasma immersion ion implantation (PIII) was studied as a pretreatment method for improving the surface activity of TiN coatings deposited by high power impulse magnetron sputtering (HiPIMS) before being sealed with an ALD (Atomic… read more here.
Keywords: tin coatings; surface; ion implantation; corrosion ... See more keywords
Role of nonlocal thermoelastic peaks in the stress and texture evolution of TiN coatings formed by plasma based ion implantation and deposition
Sign Up to like & getrecommendations! Published in 2020 at "Surface and Coatings Technology"
DOI: 10.1016/j.surfcoat.2020.125695
Abstract: Abstract A thermodynamic approach based on the concept of nonlocal thermoelastic peaks (NTP), which are generated by implanted ions, is used to explain the structure formation and stress state in TiN coatings synthesized by plasma… read more here.
Keywords: nonlocal thermoelastic; ion implantation; ion; tin coatings ... See more keywords
Experimental and modeling study on the role of Ar addition to the working gas on the development of intrinsic stress in TiN coatings produced by filtered vacuum-arc plasma
Sign Up to like & getrecommendations! Published in 2017 at "Thin Solid Films"
DOI: 10.1016/j.tsf.2017.08.033
Abstract: Abstract The aim of this work is to study and model the effect of argon addition to the N 2 working gas on the intrinsic stress of TiN coatings deposited via rectilinear filtered vacuum arc… read more here.
Keywords: working gas; gas; stress; tin coatings ... See more keywords
Effects of duty cycle on microstructure of TiN coatings prepared using CAE/HiPIMS
Sign Up to like & getrecommendations! Published in 2021 at "Vacuum"
DOI: 10.1016/j.vacuum.2021.110449
Abstract: Abstract This paper reports on a novel HiPIMS-assisted CAE deposition process using a Ti target for the fabrication of TiN coatings on WC substrates. Our primary objective was to elucidate the influence of duty cycle… read more here.
Keywords: tin coatings; cycle; duty cycle; cycle microstructure ... See more keywords