Recent Advances in the Design of Novel β‐Titanium Alloys Using Integrated Theory, Computer Simulation, and Advanced Characterization
Sign Up to like & getrecommendations! Published in 2021 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202100152
Abstract: Metastable β‐titanium (β‐Ti) alloys, because of their combination of high specific strength, superior corrosion resistance, and excellent biocompatibility, have found increasingly widespread application in aerospace, automobile, biomedical, and chemical industries. Many different pathways, available for… read more here.
Keywords: phase; advanced characterization; characterization; titanium alloys ... See more keywords
Crystal Geometry Parameters of Structural Components of Various Titanium Alloys
Sign Up to like & getrecommendations! Published in 2018 at "Metal Science and Heat Treatment"
DOI: 10.1007/s11041-018-0215-4
Abstract: The orientation characteristics of structural components of titanium alloys with different types of structure determined by the method of EBSD analysis are shown to be interrelated with the deformation mechanism determining the properties of polycrystalline… read more here.
Keywords: parameters structural; titanium alloys; structural components; crystal geometry ... See more keywords
Increasing Wear Resistance of Titanium Alloys by Anode Plasma Electrolytic Saturation with Interstitial Elements
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-017-2655-1
Abstract: AbstractsIn our previous studies, we have shown that anode plasma electrolytic saturation of titanium alloys with nitrogen and carbon can improve their tribological properties. Obtained structure containing oxide layer and solid solution of diffused element… read more here.
Keywords: titanium alloys; anode plasma; plasma electrolytic; electrolytic saturation ... See more keywords
New Nomenclatures for Heat Treatments of Additively Manufactured Titanium Alloys
Sign Up to like & getrecommendations! Published in 2017 at "JOM"
DOI: 10.1007/s11837-017-2358-y
Abstract: AbstractThe heat-treatment designations and microstructure nomenclatures for many structural metallic alloys were established for traditional metals processing, such as casting, hot rolling or forging. These terms do not necessarily apply for additively manufactured (i.e., three-dimensionally… read more here.
Keywords: nomenclatures heat; titanium alloys; heat; additively manufactured ... See more keywords
Microstructure and Mechanical Property of Ti-5Al-2.5Sn/Ti-6Al-4V Dissimilar Titanium Alloys Integrally Fabricated by Selective Laser Melting
Sign Up to like & getrecommendations! Published in 2020 at "JOM"
DOI: 10.1007/s11837-019-03988-6
Abstract: Metallic structural components made from dissimilar titanium alloys are playing important roles in high-end industries such as aerospace and aviation. In this paper, a Ti-5Al-2.5Sn/Ti-6Al-4V dissimilar titanium alloy material was additively manufactured by the selective… read more here.
Keywords: 5sn 6al; titanium alloys; dissimilar titanium; 5al 5sn ... See more keywords
Effect of microstructure and cutting speed on machining behavior of Ti6Al4V alloy
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Mechanical Science and Technology"
DOI: 10.1007/s12206-017-0413-9
Abstract: Machining of aerospace and biomedical grade titanium alloys has always been a challenge because of their low conductivity and elastic modulus. Different machining methods and parameters have been adopted for high precision machining of titanium… read more here.
Keywords: titanium alloys; cutting speed; microstructure cutting; effect microstructure ... See more keywords
Performance Assessment of Ni-Coated Titanium Alloys Under Wet Conditions
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Bio- and Tribo-Corrosion"
DOI: 10.1007/s40735-020-00343-0
Abstract: Since its first introduction in the 1950s, Ti6Al4V became the most sympathetic titanium alloy due to its attractive mechanical and physicochemical properties and is currently extensively used, for e.g., in machining, automotive, aerospace, as well… read more here.
Keywords: titanium alloys; friction coefficient; performance assessment; titanium ... See more keywords
Nanoparticle-mediated ultra grain refinement and reinforcement in additively manufactured titanium alloys
Sign Up to like & getrecommendations! Published in 2021 at "Additive manufacturing"
DOI: 10.1016/j.addma.2021.102173
Abstract: Abstract Additive manufacturing, also known as 3D printing, overcomes many design and manufacturing constraints to allow almost direct production of metals into complicated geometries. However, coarse columnar grain structures, up to the millimeter-scale, are commonly… read more here.
Keywords: titanium alloys; additively manufactured; nanoparticle mediated; manufacturing ... See more keywords
Biocompatible response of hydroxyapatite coated on near-β titanium alloys by E-beam evaporation method
Sign Up to like & getrecommendations! Published in 2018 at "Biocatalysis and agricultural biotechnology"
DOI: 10.1016/j.bcab.2018.07.014
Abstract: Abstract Biomedical implants such as dental and orthopedic implants fails due to poor mechanical and biological properties. In order to solve this problem, Electron beam (e-beam) evaporations is used as one of the methods to… read more here.
Keywords: titanium alloys; near titanium; hydroxyapatite coated; titanium ... See more keywords
The initial oxidation behavior of uranium and uranium-titanium alloys in standing storage
Sign Up to like & getrecommendations! Published in 2020 at "Corrosion Science"
DOI: 10.1016/j.corsci.2020.108879
Abstract: Abstract The oxidation kinetics of uranium and uranium-titanium (U-Ti) alloys at two typical storage atmospheres (dry air and 50 % RH air) were investigated based on the reflectance spectroscopy. Accurate kinetics parameters in parabolic stage… read more here.
Keywords: storage; oxidation; titanium alloys; uranium titanium ... See more keywords
Electrodeposition of aluminium-titanium alloys from molten fluoride-oxide electrolytes
Sign Up to like & getrecommendations! Published in 2021 at "Electrochemistry Communications"
DOI: 10.1016/j.elecom.2021.106919
Abstract: Abstract This study reports the direct production of an aluminium-titanium alloy during aluminium electrolysis in fluoride-based melts. Experiments were conducted in a laboratory cell dedicated to current efficiency measurements. The temperature was varied from 960… read more here.
Keywords: electrodeposition aluminium; titanium alloys; molten fluoride; aluminium titanium ... See more keywords