Effects of Process Parameters on Properties of Silver‐Coated Graphene Reinforced Low Modulus Titanium Matrix Composites Fabricated by Selective Laser Melting
Sign Up to like & getrecommendations! Published in 2025 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202500030
Abstract: In this study, Ag@GNSs‐reinforced Ti‐13Nb‐13Zr (TC26) composites are fabricated using the selective laser melting technology. The processing parameters are optimized through investigating the density, microstructure, and mechanical properties of composites on the basis of laser… read more here.
Keywords: laser; titanium matrix; composites fabricated; density ... See more keywords
The microstructures and mechanical properties of graphene-reinforced titanium matrix composites
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.152057
Abstract: Abstract This study uses spark plasma sintering (SPS) to prepare graphene nanoplatelet (GNP)-reinforced titanium matrix composite materials. Heat treatment is used during rolling and annealing (RA this result represents an increase of 46% compared with… read more here.
Keywords: reinforced titanium; microstructures mechanical; titanium; mechanical properties ... See more keywords
Machinablility of titanium matrix composites (TMC) reinforced with multi-walled carbon nanotubes
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2020.04.008
Abstract: Abstract Carbon nanotube (CNT) reinforced titanium matrix composite (TMC) is a type of new material with promising potentials in industry because of its superior properties such as low density and high elastic modulus. In this… read more here.
Keywords: carbon; machinability; walled carbon; titanium ... See more keywords
Microstructure Evolution and Properties of ZrC–NbC System Titanium Matrix Composites Based on Experiments and ANSYS Simulations
Sign Up to like & getrecommendations! Published in 2025 at "Coatings"
DOI: 10.3390/coatings15060626
Abstract: The extreme environment of aerospace requires severe material properties, and in situ autogenous ZrC–NbC dual-phase reinforced titanium matrix composites have attracted much attention. In this study, TiC/Ti composites (TMC1–TMC4) with different NbC contents (0–9 wt%)… read more here.
Keywords: titanium matrix; ansys simulations; zrc nbc; matrix composites ... See more keywords
Research Progress on Microstructure, Mechanical Properties, and Strengthening Mechanisms of In Situ-Synthesized Ceramic-Reinforced Titanium Matrix Composite Coatings via Laser Cladding
Sign Up to like & getrecommendations! Published in 2025 at "Coatings"
DOI: 10.3390/coatings15070815
Abstract: The laser cladding (LC) of titanium matrix composite coatings (TMCCs) on titanium components not only effectively enhances the wear resistance, fatigue resistance, corrosion resistance, and biocompatibility of titanium and its alloys, but also circumvents the… read more here.
Keywords: mechanical properties; titanium matrix; titanium; composite coatings ... See more keywords
Microstructure and Mechanical Properties of Graphene-Reinforced Titanium Matrix/Nano-Hydroxyapatite Nanocomposites
Sign Up to like & getrecommendations! Published in 2018 at "Materials"
DOI: 10.3390/ma11040608
Abstract: Biomaterial composites made of titanium and hydroxyapatite (HA) powder are among the most important biomedicalmaterials due to their good mechanical properties and biocompatibility. In this work, graphene-reinforced titanium matrix/nano-hydroxyapatite nanocomposites were prepared by vacuum hot-pressing… read more here.
Keywords: reinforced titanium; graphene reinforced; titanium; mechanical properties ... See more keywords
Evaluation of the Wear and Mechanical Properties of Titanium Diboride-Reinforced Titanium Matrix Composites Prepared by Spark Plasma Sintering
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16052078
Abstract: The synthesis of x-wt.% (where x = 2.5, 5, 7.5, and 10) TiB2-reinforced titanium matrix was accomplished through the spark plasma sintering technique (SPS). The sintered bulk samples were characterized, and their mechanical properties were… read more here.
Keywords: tib2; spark plasma; reinforced titanium; mechanical properties ... See more keywords
Eliminating Plastic Anisotropy of TiB-Reinforced Titanium Matrix Composite via Cross Rolling
Sign Up to like & getrecommendations! Published in 2025 at "Materials"
DOI: 10.3390/ma18050990
Abstract: Anisotropy is one of the concerns of titanium matrix composites (TMCs) due to its impact on subsequent processing and safe serving. In this work, we demonstrate that simply by using cross-rolling (CR) rather than unidirectional… read more here.
Keywords: titanium matrix; tib; plastic anisotropy; cross rolling ... See more keywords
Effect of Ultra-Rapid Heating/Cooling on the Microstructure and Properties of TC4-B-Si Titanium Matrix Composites
Sign Up to like & getrecommendations! Published in 2025 at "Materials"
DOI: 10.3390/ma18184223
Abstract: Titanium matrix composites (TMCs) possess excellent properties, which are widely applied in various high-end fields. An ultrafine multi-scale network structure may further enhance the TMCs. Then, the application potential is widened. Here, the in situ… read more here.
Keywords: titanium matrix; ultra rapid; titanium; matrix composites ... See more keywords