Blue Transparent OLEDs with High Stability and Transmittance for Modulating Sleep Disorders
Sign Up to like & getrecommendations! Published in 2023 at "Advanced Materials Interfaces"
DOI: 10.1002/admi.202202443
Abstract: Optoelectronics devices utilizing organic light‐emitting diodes (OLEDs) are emerging as new platforms for healthcare applications. In particular, wearable optoelectronics such as visual stimulus systems offer a distinctive advantage to intervene in and improve sleep disorders.… read more here.
Keywords: stability; transmittance; transparent oleds; modulating sleep ... See more keywords
Analysis of transmittance and degree of conversion of composite resins
Sign Up to like & getrecommendations! Published in 2019 at "Microscopy Research and Technique"
DOI: 10.1002/jemt.23364
Abstract: The objective of this study was to evaluate and correlate light transmittance (T), initial degree of conversion (IDC), and degree of conversion after 24 hr (DC24) for 22 composite resins (CR) for enamel and dentin use.… read more here.
Keywords: degree conversion; idc; composite resins; conversion ... See more keywords
Near 90% Transparent ITO-Based Flexible Electrode with Double-Sided Antireflection Layers for Highly Efficient Flexible Optoelectronic Devices.
Sign Up to like & getrecommendations! Published in 2022 at "Small"
DOI: 10.1002/smll.202201716
Abstract: As a widely used substrate for flexible electronics, indium-tin oxide-based polymer electrodes (polymer-ITO electrodes) exhibit poorly visible light transmittance of less than 80%. The inferior transmittance for polymer-ITO electrodes severely limits the performance improvement of… read more here.
Keywords: transmittance; based flexible; polymer; antireflection ... See more keywords
Efficient Near-Infrared PbS Quantum Dot Solar Cells Employing Hydrogenated In2 O3 Transparent Electrode.
Sign Up to like & getrecommendations! Published in 2022 at "Small"
DOI: 10.1002/smll.202203677
Abstract: Infrared solar cells are regarded as candidates for expanding the solar spectrum of c-Si cells, and the window electrodes are usually transparent conductive oxide (TCO) such as widely used indium tin oxide material. However, due… read more here.
Keywords: electrode; quantum; transmittance; solar cells ... See more keywords
Wavelength-dependent light transmittance in resin composites: practical implications for curing units with different emission spectra
Sign Up to like & getrecommendations! Published in 2019 at "Clinical Oral Investigations"
DOI: 10.1007/s00784-019-02896-y
Abstract: ObjectivesTo evaluate light transmittance as a function of wavelength for eight composite materials and compare the transmittance for blue light produced from two curing units with different emission spectra.Materials and methodsLight transmittance through 2- and… read more here.
Keywords: units different; light transmittance; transmittance; curing units ... See more keywords
A tunable optoelectronic nanofibrillated cellulose/CdS quantum dot film with improved transmittance and strength
Sign Up to like & getrecommendations! Published in 2018 at "Cellulose"
DOI: 10.1007/s10570-018-1727-1
Abstract: Nanofibrillated cellulose (NFC) is an ideal building block in novel bio-based nanomaterials fabrication for various emerging applications. In this study, a biomass-based optoelectronic material of cadmium sulfide (CdS) quantum dots (QDs)-decorated TEMPO oxidized NFC was… read more here.
Keywords: nanofibrillated cellulose; nfc cds; cds qds; cds quantum ... See more keywords
Length-dependent electro-optical properties of silver nanowires-based transparent conducting films
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-019-00996-9
Abstract: In this paper, silver nanowires (AgNWs) with mean diameters of 65 nm and mean length of 9.8 µm were synthesized by the polyol solvothermal method. Sonication-induced scission was used to obtain AgNWs with a length range of… read more here.
Keywords: length; agnws length; resistance; silver nanowires ... See more keywords
Fabrication of UV-curable silicone coating with high transmittance and laser-induced damage threshold for high-power laser system
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Sol-Gel Science and Technology"
DOI: 10.1007/s10971-018-4807-7
Abstract: AbstractThird harmonic generating (THG) element is an important component for high-power laser system and its incident side is in need of high transmittance and laser-induced damage threshold (LIDT) at specified wavelengths (1064 nm and 532 nm) to… read more here.
Keywords: high power; laser; high transmittance; power laser ... See more keywords
The optical analyses of the multilayer transparent electrode and the formation of ITO/Mesh-Ag/ITO multilayers for enhancing an optical transmittance
Sign Up to like & getrecommendations! Published in 2019 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2019.05.106
Abstract: Abstract As a highly conductive and transparent electrode, ITO/Ag/ITO multilayers are fabricated using an in-line sputtering method. Optimal thickness conditions have been investigated in terms of optical transmittance and electrical conductance. Considering the optical properties,… read more here.
Keywords: optical transmittance; transmittance; sheet resistance; transparent electrode ... See more keywords
Intense pulsed light-induced structure-transformed ultrathin Ni shell for improving the chemical, thermal, and electrical reliability of metal nanowire electrodes without transmittance loss
Sign Up to like & getrecommendations! Published in 2020 at "Chemical Engineering Journal"
DOI: 10.1016/j.cej.2020.124517
Abstract: Abstract Metal nanowires (NWs) boost the development of flexible transparent conductive electrodes (TCEs), but they are hardly applied in industrial productions due to poor reliability. Although various coating technologies have been used to resolve this… read more here.
Keywords: structure transformed; intense pulsed; shell; reliability ... See more keywords
Preparation, Properties and Formation Mechanism of Zirconium-Si Hybrid High Transmittance Hydrophobic Coating
Sign Up to like & getrecommendations! Published in 2021 at "Colloids and Surfaces A: Physicochemical and Engineering Aspects"
DOI: 10.1016/j.colsurfa.2021.127649
Abstract: Abstract A two-step synthesis method of a new hybrid coating was discussed. Zirconium silicate hybrid sol was prepared by in-situ hydrolysis polymerization of zirconium acetate (ZrAc) and Octyltrimethoxy silane (OTMS) in alcohol water system. FTIR… read more here.
Keywords: hydrolysis time; zrac; zirconium; zirconium hybrid ... See more keywords