Effect of Traverse Speed on the Defect Characteristic, Microstructure, and Mechanical Property of Friction Stir Welded T-Joints of Dissimilar Mg/Al Alloy
Sign Up to like & getrecommendations! Published in 2020 at "Advances in Materials Science and Engineering"
DOI: 10.1155/2020/4515079
Abstract: The AZ31 B/2024-T4 T-lap-joint was successfully fabricated by friction stir welding (FSW) with different welding parameters. The defect characteristics and metallurgical structure were observed and analyzed using optical microscope (OM) and scanning electron microscopy (SEM). Besides,… read more here.
Keywords: friction; effect traverse; traverse speed; friction stir ... See more keywords
Optimization of microstructural and mechanical properties of brass wire produced by friction stir extrusion using Taguchi method
Sign Up to like & getrecommendations! Published in 2021 at "Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications"
DOI: 10.1177/14644207211032992
Abstract: Friction stir back extrusion is used to produce brass wires from its chips, and then the process parameters are optimized using Taguchi L9 orthogonal design of experiments. The rotational speed, traverse speed, and the produced… read more here.
Keywords: rotational speed; using taguchi; wire; friction stir ... See more keywords
Characteristics of Friction Stir Welding of 3 mm thick ABS and PC thermoplastic polymers: An experimental approach
Sign Up to like & getrecommendations! Published in 2025 at "PLOS One"
DOI: 10.1371/journal.pone.0322456
Abstract: The utilization of thermoplastics is extensively prevalent in modern industrial sectors owing to their distinctive mechanical features. Friction stir welding is recognized as a distinctive joining technology that addresses the weaknesses of heat-induced fusion welding.… read more here.
Keywords: traverse speed; stir welding; speed; friction stir ... See more keywords
Experimental Study on the Effect of Water Jet Cutting Parameters on Maize Stalks
Sign Up to like & getrecommendations! Published in 2023 at "Agriculture"
DOI: 10.3390/agriculture13040880
Abstract: Cutting maize stalks using water jet cutting technology is a new method of stalk management before no-tillage sowing. Aiming to cut off the maize stalks (stems and stem nodes), we conducted an all-factor cutting experiment… read more here.
Keywords: traverse speed; water jet; water; maize stalks ... See more keywords
Impacts of Traverse Speed and Material Thickness on Abrasive Waterjet Contour Cutting of Austenitic Stainless Steel AISI 304L
Sign Up to like & getrecommendations! Published in 2021 at "Applied Sciences"
DOI: 10.3390/app11114925
Abstract: Abrasive water jet machining is a proficient alternative for cutting difficult-to-machine materials with complex geometries, such as austenitic stainless steel 304L (AISI304L). However, due to differences in machining responses for varied material conditions, the abrasive… read more here.
Keywords: traverse speed; material removal; speed material; abrasive waterjet ... See more keywords
Effect of FSW Traverse Speed on Mechanical Properties of Copper Plate Joints
Sign Up to like & getrecommendations! Published in 2020 at "Materials"
DOI: 10.3390/ma13081937
Abstract: The paper describes the influence of the friction stir welding travel speed on the mechanical properties of the butt joints of copper plates. The results of static and fatigue tests of the base material (Cu-ETP… read more here.
Keywords: effect fsw; fsw traverse; speed mechanical; mechanical properties ... See more keywords
AZ91 Magnesium Alloy CMT Cladding Layer Processed Using Friction Stir Processing: Effect of Traverse Speed on Microstructure and Mechanical Properties
Sign Up to like & getrecommendations! Published in 2024 at "Materials"
DOI: 10.3390/ma17102348
Abstract: Friction stir processing (FSP) is a solid-state treating method to enhance the mechanical properties of materials by altering their microstructure. In this study, FSP was applied to the AZ91 magnesium alloy cladding layer prepared using… read more here.
Keywords: layer; mechanical properties; cladding layer; traverse speed ... See more keywords
Influence of the Traverse Speed of the Stylus Tip on Changes in the Areal Texture Parameters of Machined Surfaces
Sign Up to like & getrecommendations! Published in 2024 at "Materials"
DOI: 10.3390/ma17205052
Abstract: Measurements of areal (3D) surface texture using optical methods are very popular because of the short measurement time compared to the stylus tip technique. However, they are very sensitive to measurement errors. In some cases,… read more here.
Keywords: texture; traverse speed; stylus tip; speed ... See more keywords