Turning of Inconel 718 using inserts with cooling channels under high pressure jet coolant assistance
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2017.03.032
Abstract: Abstract A large amount of cutting heat is generated in the turning process of nickel-base superalloy Inconel 718. This research proposed a new concept of inserts with cooling channels to enhance the heat transfer from… read more here.
Keywords: inconel 718; inserts cooling; turning inconel; high pressure ... See more keywords
Turning of Inconel 718 with whisker-reinforced ceramic tools applying vegetable-based cutting fluid mixed with solid lubricants by MQL
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2018.11.032
Abstract: Abstract The rule of thumb in the machining of nickel base superalloys with ceramic tools is to cut dry and no attempt of applying MQL with the addition of solid lubricant was made, according to… read more here.
Keywords: whisker reinforced; reinforced ceramic; ceramic tools; inconel 718 ... See more keywords
Performance assessment of MQSL: Minimum quantity solid lubricant during turning of Inconel 718
Sign Up to like & getrecommendations! Published in 2017 at "Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture"
DOI: 10.1177/0954405415592128
Abstract: Abundant application of cutting fluids may increase production cost and cause environmental and health damages, particularly when not properly managed. Thus, alternative measures are needed to overcome the difficulties of using cutting fluids. If sustainable… read more here.
Keywords: turning inconel; inconel 718; minimum quantity; lubricant ... See more keywords
Characterization of various coatings on wear suppression in turning of Inconel 625: A three-dimensional numerical simulation
Sign Up to like & getrecommendations! Published in 2017 at "Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology"
DOI: 10.1177/1350650116677131
Abstract: Applying cutting tool with longer functioning time is a vital issue in machining of the nickel-based super alloys. However, the experimental analysis of this problem is quite expensive. Thus, three-dimensional numerical simulation of tool wear… read more here.
Keywords: three dimensional; turning inconel; dimensional numerical; tool ... See more keywords
Optimization of Dry Turning of Inconel 601 Alloy Based on Surface Roughness, Tool Wear, and Material Removal Rate
Sign Up to like & getrecommendations! Published in 2023 at "Metals"
DOI: 10.3390/met13061068
Abstract: In this work, the dry turning of Inconel 601 alloy in a dry environment with PVD-coated cutting inserts was studied. Turning was performed at various cutting speeds, feeds, insert shapes, corner radii, rake angles, and… read more here.
Keywords: turning inconel; surface roughness; dry turning; 601 alloy ... See more keywords