Evaluation of an environment-friendly turning process of Inconel 601 in dry conditions
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Cleaner Production"
DOI: 10.1016/j.jclepro.2020.121919
Abstract: Abstract Presented in this paper is a methodology for evaluation of dry turning process along with optimal machining parameters, which allows a compromise between technological, economical, and ecological requirements. Dry longitudinal turning of Ni-based superalloy… read more here.
Keywords: energy consumption; minimization; inconel 601; process ... See more keywords
The prediction method of tool life on small lot turning process – Development of Digital Twin for production
Sign Up to like & getrecommendations! Published in 2020 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2020.10.041
Abstract: Abstract Saving resources is one of the most significant factors in the manufacturing industry. There are in the factory, several different products under processing at the same time, therefore the handling of production conditions could… read more here.
Keywords: small lot; tool life; production; turning process ... See more keywords
Analysis of dimple structure fabricated using turning process and subsequent reduction in friction
Sign Up to like & getrecommendations! Published in 2019 at "Wear"
DOI: 10.1016/j.wear.2018.12.040
Abstract: Abstract Dimples is an important structure in the context of surface texturing due to its role in improving the heat transfer while minimizing wear and friction on sliding mechanical components. In this study, various sizes… read more here.
Keywords: surface; turning process; process; friction ... See more keywords
Optimization of microtextured tools parameters in thread turning process of aluminum 7075 aerospace alloy
Sign Up to like & getrecommendations! Published in 2020 at "Materials and Manufacturing Processes"
DOI: 10.1080/10426914.2020.1772485
Abstract: ABSTRACT In this paper, the thread turning of aluminum 7075 aerospace alloy is studied using microtextured carbide cutting inserts. The main target of this research work is to optimize the parameters of microtextured tools using… read more here.
Keywords: aluminum 7075; turning process; aerospace alloy; 7075 aerospace ... See more keywords
Tool nose radius effects in turning process
Sign Up to like & getrecommendations! Published in 2020 at "Machining Science and Technology"
DOI: 10.1080/10910344.2020.1815038
Abstract: Abstract The main goal of this article is to study the effects of tool nose radius on some performances in turning process. An analytical approach is developed and adapted for cutting with round inserts or… read more here.
Keywords: nose radius; turning process; tool nose; chip ... See more keywords
Fiber-Optic Pyrometer for Very Localized Temperature Measurements in a Turning Process
Sign Up to like & getrecommendations! Published in 2017 at "IEEE Journal of Selected Topics in Quantum Electronics"
DOI: 10.1109/jstqe.2016.2627553
Abstract: A fiber-optic two-color pyrometer based on glass multimode fibers with 62.5 μm diameter and 0.275 numerical aperture is used for localized temperature measurements in turning processes. Operation wavelengths improve temperature measurement accuracy. The system is… read more here.
Keywords: localized temperature; temperature; measurements turning; fiber optic ... See more keywords
Surface stress distribution of thin-walled spherical pure iron component after turning process
Sign Up to like & getrecommendations! Published in 2022 at "Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science"
DOI: 10.1177/09544062221118810
Abstract: There is still gap for predicting the residual stress distribution of machined surface for curved components effectively in academic research. In order to obtain the spatial distribution of surface residual stress for such workpieces, a… read more here.
Keywords: stress; pure iron; surface; turning process ... See more keywords
Parametric study and multicharacteristic optimization of rotary turning process assisted by longitudinal ultrasonic vibration
Sign Up to like & getrecommendations! Published in 2017 at "Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering"
DOI: 10.1177/0954408916651894
Abstract: Turning with rotary tool is a newly developed alternative of the conventional turning process in which cutting edge of a round insert rotates about its axis, so that a continuously indexed cutting edge is fed… read more here.
Keywords: vibratory rotary; vibration; tool; rotary turning ... See more keywords
Investigation of the turning process of the TC21 titanium alloy: Experimental analysis and 3D simulation
Sign Up to like & getrecommendations! Published in 2020 at "Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering"
DOI: 10.1177/0954408920967777
Abstract: Titanium alloys are widely used in the aerospace industry due to their superior properties such as high strength and low density. As a new titanium alloy with higher strength and lower heat conductivity, titanium alloy… read more here.
Keywords: alloy; titanium alloy; process tc21; process ... See more keywords