Articles with "type bi2te3" as a keyword



Photo from wikipedia

High Thermoelectric Figure of Merit in p-Type (Bi2Te3)x − (Sb2Te3)1−x Alloys Made from Element-Mechanical Alloying and Spark Plasma Sintering

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of Electronic Materials"

DOI: 10.1007/s11664-018-6706-7

Abstract: Abstractp-Type (Bi2Te3)x − (Sb2Te3)1−x alloys with high thermoelectric properties were fabricated for waste heat energy recovery by mechanical alloying followed by spark plasma sintering. The samples’ diffraction peaks, such as the (015) positions, were slightly shifted from… read more here.

Keywords: high thermoelectric; bi2te3 sb2te3; type bi2te3; sb2te3 ... See more keywords
Photo by stayandroam from unsplash

Impurity-free, mechanical doping for the reproducible fabrication of the reliable n-type Bi2Te3-based thermoelectric alloys

Sign Up to like & get
recommendations!
Published in 2018 at "Acta Materialia"

DOI: 10.1016/j.actamat.2018.02.061

Abstract: Abstract Precise control of carrier density is essential to synthesize high-performance thermoelectric materials. Doping by impurities is often frustrated in n-type Bi2Te3 alloys by incomplete activation, bipolar doping, the formation of secondary phases, and prevailing… read more here.

Keywords: impurity free; type bi2te3; fabrication; density ... See more keywords
Photo by jordanmcdonald from unsplash

Thermoelectric performance of electrophoretically deposited p-type Bi2Te3 film

Sign Up to like & get
recommendations!
Published in 2019 at "Applied Surface Science"

DOI: 10.1016/j.apsusc.2018.02.237

Abstract: Abstract In this study, p-type Bi2Te3 films were fabricated using a fast, cost-effective, electrophoretic deposition method for thermoelectric applications. The sintering process was carried out at 693 K, which resulted in compact, dense coatings. SEM investigations… read more here.

Keywords: performance electrophoretically; bi2te3; type bi2te3; film ... See more keywords
Photo from wikipedia

Enhancement of thermoelectric performance of N-type Bi2Te3 based thin films via in situ annealing during magnetron sputtering

Sign Up to like & get
recommendations!
Published in 2020 at "Ceramics International"

DOI: 10.1016/j.ceramint.2020.02.117

Abstract: Abstract In this work, n-type Bi2Te3 based thin films were prepared in 300 °C via DC magnetron sputtering, and influences of sputtering power and annealing time on thermoelectric properties of films were investigated. The raise of… read more here.

Keywords: based thin; magnetron sputtering; thin films; situ annealing ... See more keywords
Photo from wikipedia

Mapping thermoelectric properties of polycrystalline n-type Bi2Te3-xSex alloys by composition and doping level

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of Alloys and Compounds"

DOI: 10.1016/j.jallcom.2020.155828

Abstract: Abstract The thermoelectric figure-of-merit (zT) is a general standard used to evaluate the performance of thermoelectric materials. However, the performance of thermoelectric devices is largely affected by other properties such as electrical conductivity, thermal conductivity,… read more here.

Keywords: performance thermoelectric; thermoelectric properties; type bi2te3; composition ... See more keywords
Photo by stayandroam from unsplash

Cu2Te Incorporation-Induced High Average Thermoelectric Performance in p-Type Bi2Te3 Alloys.

Sign Up to like & get
recommendations!
Published in 2022 at "ACS applied materials & interfaces"

DOI: 10.1021/acsami.2c13527

Abstract: p-Type (Bi, Sb)2Te3 alloys are attractive materials for near-room-temperature thermoelectric applications due to their high atomic masses and large spin-orbit interactions. However, their narrow band gaps originating from spin-orbit interactions lead to bipolar excitation, thereby… read more here.

Keywords: temperature; type bi2te3; cu2te incorporation; type ... See more keywords
Photo from wikipedia

Development of Nanostructured Bi2Te3 with High Thermoelectric Performance by Scalable Synthesis and Microstructure Manipulations.

Sign Up to like & get
recommendations!
Published in 2023 at "ACS applied materials & interfaces"

DOI: 10.1021/acsami.2c21561

Abstract: Nanostructuring of thermoelectric (TE) materials leads to improved energy conversion performance; however, it requires a perfect fit between the nanoprecipitates' chemistry and crystal structure and those of the matrix. We synthesize bulk Bi2Te3 from molecular… read more here.

Keywords: type bi2te3; development; chemistry; synthesis ... See more keywords
Photo from wikipedia

Post-Electric Current Treatment Approaching High-Performance Flexible n-Type Bi2Te3 Thin Films

Sign Up to like & get
recommendations!
Published in 2022 at "Micromachines"

DOI: 10.3390/mi13091544

Abstract: Inorganic n-type Bi2Te3 flexible thin film, as a promising near-room temperature thermoelectric material, has attracted extensive research interest and application potentials. In this work, to further improve the thermoelectric performance of flexible Bi2Te3 thin films,… read more here.

Keywords: electric current; bi2te3 thin; type bi2te3; thin films ... See more keywords