Simultaneously enhancing the flow properties and mechanical strength of polyphenylene sulfide via in‐mold ultrasonic‐assisted injection molding
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.55927
Abstract: Injection molding is widely used for making intricate plastic products due to its precision, cost efficiency, and fast production. Industries like consumer electronics, aerospace, and medical, demand high mechanical properties from these parts. However, high‐performance… read more here.
Keywords: ultrasonic assisted; mechanical properties; injection; mold ultrasonic ... See more keywords
Effect of Ultrasonic Treatment on Soybean Oil: Focus on Degumming of Soybean Crude Oil and the Quality of Degummed Oil
Sign Up to like & getrecommendations! Published in 2024 at "European Journal of Lipid Science and Technology"
DOI: 10.1002/ejlt.202400115
Abstract: This study investigated the effect of ultrasonic‐assisted degumming technology on the degumming of soybean crude oil, and the quality change of degummed oil was analyzed. The response surface method designed by Box–Behnken was used to… read more here.
Keywords: ultrasonic assisted; soybean crude; crude oil; degummed oil ... See more keywords
Structural Phase Evolution in Ultrasonic-Assisted Friction Stir Welded 2195 Aluminum Alloy Joints
Sign Up to like & getrecommendations! Published in 2017 at "Russian Physics Journal"
DOI: 10.1007/s11182-017-1172-x
Abstract: The authors examined the structural and phase state of fixed joints produced by method of friction stir welding (FSW) and ultrasonic-assisted friction stir welding (UAFSW) from extruded profile of aluminum alloy AA2195. In order to… read more here.
Keywords: stir; structural phase; ultrasonic assisted; friction stir ... See more keywords
Ultrasonic assisted preparation of ultrafine Pd supported on NiFe-layered double hydroxides for p-nitrophenol degradation
Sign Up to like & getrecommendations! Published in 2022 at "Environmental Science and Pollution Research"
DOI: 10.1007/s11356-022-19641-w
Abstract: NiFe-layered double hydroxide (NiFe-LDH)–loaded ultrafine Pd nanocatalysts (Pd/NiFe-LDHs) were prepared by a facile ultrasonic-assisted in situ reduction technology without any stabilizing agents or reducing agents. Pd/NiFe-LDHs were characterized by FT-IR, XRD, XPS, and TEM. PdNPs… read more here.
Keywords: nife ldhs; assisted preparation; preparation ultrafine; ultrasonic assisted ... See more keywords
An Investigation of Surface Roughness in Ultrasonic Assisted Dry Grinding of 12Cr2Ni4A with Large Diameter Grinding Wheel
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Precision Engineering and Manufacturing"
DOI: 10.1007/s12541-018-0110-3
Abstract: Ultrasonic assisted dry grinding (UADG) is a novel green manufacturing technology for decreasing the negative environment impact of cutting fluids and improving the surface characteristics. In this study, the influences of the ultrasonic amplitude, grinding… read more here.
Keywords: assisted dry; surface roughness; surface; dry grinding ... See more keywords
Optimizing the ultrasonic-assisted extraction of antioxidants from Ulva lactuca algal biomass using factorial design
Sign Up to like & getrecommendations! Published in 2021 at "Biomass Conversion and Biorefinery"
DOI: 10.1007/s13399-021-01516-8
Abstract: Ultrasonic-assisted extraction (UAE) is increasingly emerging as a highly effective extraction technique. This extraction technique is affected by several experimental factors. The present work aimed to optimize the ultrasonic-assisted extraction of antioxidants from Ulva lactuca… read more here.
Keywords: antioxidants ulva; extraction antioxidants; assisted extraction; biomass ... See more keywords
Numerical investigation of hot ultrasonic assisted turning of aviation alloys
Sign Up to like & getrecommendations! Published in 2018 at "Journal of the Brazilian Society of Mechanical Sciences and Engineering"
DOI: 10.1007/s40430-018-1037-4
Abstract: Aviation alloys exhibit superior properties such as high-strength-to-weight ratio and corrosion resistance but these alloys possess poor machinability. To overcome this disadvantage, new machining methods (Ultrasonic assisted machining, hot machining, etc.) are developed. Hot ultrasonic… read more here.
Keywords: assisted turning; ultrasonic assisted; cutting forces; aviation alloys ... See more keywords
Optimization of ultrasonic assisted extraction of fatty acids from Borago Officinalis L. flower by central composite design
Sign Up to like & getrecommendations! Published in 2017 at "Arabian Journal of Chemistry"
DOI: 10.1016/j.arabjc.2012.06.009
Abstract: Abstract In the present study, the ultrasonic assisted extraction (UAE) of essential oils and fatty acids from Borago officinalis L. flower was developed by using n -hexane as extracting solvent. The obtained extracts were compared… read more here.
Keywords: extraction; acids borago; fatty acids; assisted extraction ... See more keywords
Ultrasonic-assisted extraction of polysaccharide from Dendrobium officinale: Kinetics, thermodynamics and optimization
Sign Up to like & getrecommendations! Published in 2022 at "Biochemical Engineering Journal"
DOI: 10.1016/j.bej.2021.108227
Abstract: Abstract Dendrobium officinale polysaccharide (DOP) was extracted from Dendrobium officinale by ultrasonic-assisted hot water extraction (UHWE). Its characterizations were analyzed by scanning electron microscope (SEM), Fourier Transform infrared spectroscopy (FT-IR) and Ultra performance liquid chromatography-mass… read more here.
Keywords: extraction; thermodynamics; assisted extraction; dendrobium officinale ... See more keywords
Ultrasonic assisted etching and delaminating of Ti 3 C 2 Mxene
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.01.147
Abstract: Abstract In this work, A ultrasonic assisted method was presented for etching and delaminating Ti3C2 Mxene. With the help of ultrasonic cavitation, the process of etching in hydrofluoric acid (HF) was greatly shortened from 24 h… read more here.
Keywords: assisted etching; ultrasonic assisted; etching delaminating; delaminating mxene ... See more keywords
Mechanism and feasibility of ultrasonic-assisted milling to improve the machined surface quality of 2D Cf/SiC composites
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.03.047
Abstract: Abstract For Cf/SiC composites, obtaining high-quality surface by machining is a great challenge. In this paper, the PCD tool was used for ultrasonic-assisted milling experiments of Cf/SiC composites. The machined surface integrity was evaluated based… read more here.
Keywords: surface; ultrasonic assisted; sic composites; machined surface ... See more keywords