Using 3D printing techniques to create an anthropomorphic thorax phantom for medical imaging purposes
Sign Up to like & getrecommendations! Published in 2018 at "Medical Physics"
DOI: 10.1002/mp.12644
Abstract: PURPOSE Imaging phantoms are widely used for testing and optimization of imaging devices without the need to expose humans to irradiation. However, commercially available phantoms are commonly manufactured in simple, generic forms and sizes and… read more here.
Keywords: using printing; phantom; anthropomorphic thorax; create anthropomorphic ... See more keywords
Introducing a novel model for simulating large loop excision of the transformation zone (LLETZ) using 3D printing technique
Sign Up to like & getrecommendations! Published in 2021 at "Archives of Gynecology and Obstetrics"
DOI: 10.1007/s00404-021-06209-1
Abstract: Electrosurgery is the gold-standard procedure for the treatment of cervical dysplasia. The quality of the outcome depends on the accuracy of performance, which underlines the role of adequate training of surgeons, especially, as this procedure… read more here.
Keywords: using printing; novel model; model simulating; introducing novel ... See more keywords
Development of composite springs using 4D printing method
Sign Up to like & getrecommendations! Published in 2019 at "Composite Structures"
DOI: 10.1016/j.compstruct.2018.12.003
Abstract: Abstract Composite springs have been used in many engineering applications, particularly in the transportation industry. This is due to their light weight, good stiffness, good strength, good corrosion and fatigue resistances. Normally special molds need… read more here.
Keywords: composite structures; springs using; using printing; development composite ... See more keywords
Mechanical behavior of structurally reconstructed irregular columnar jointed rock mass using 3D printing
Sign Up to like & getrecommendations! Published in 2020 at "Engineering Geology"
DOI: 10.1016/j.enggeo.2020.105509
Abstract: Abstract Baihetan hydropower station is one the most famous hydroelectric projects in China. The columnar jointed rock mass (CJRM) is widely distributed in this area such as at the dam site and drainage tunnel. The… read more here.
Keywords: using printing; columnar jointed; jointed rock; mechanical properties ... See more keywords
Using 3D Printing and Mirror Image Modeling in Orbital Floor Reconstruction
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Craniofacial Surgery"
DOI: 10.1097/scs.0000000000007672
Abstract: Abstract Three-dimensional (3D) modeling and printing technologies are increasingly utilized as tools to assist in complex craniofacial reconstructions. Herein, the authors report the intraoperative use of sterilized 3D models printed in-house to mold a custom… read more here.
Keywords: reconstruction; mirror image; image modeling; using printing ... See more keywords
Multidisciplinary topology and material optimization approach for developing patient-specific limb orthosis using 3D printing
Sign Up to like & getrecommendations! Published in 2023 at "Rapid Prototyping Journal"
DOI: 10.1108/rpj-12-2022-0435
Abstract: Purpose This study aims to explore the potential benefits favoring the adaptation of structural optimization techniques in the additive manufacturing (AM) of medical utilities to meet the repetitive demand for functionally precise customized orthoses. Irregularities… read more here.
Keywords: topology; using printing; approach; splint ... See more keywords
Development of a wind turbine using 3D printing: A prospection of electric power generation from daily commute by car
Sign Up to like & getrecommendations! Published in 2021 at "Wind Engineering"
DOI: 10.1177/0309524x211029563
Abstract: The design, construction, and development of micro-turbines using 3D printing has been an important advance in the wind energy field to explore the possibility of offering viable alternative for the electric power generation, reducing the… read more here.
Keywords: wind turbine; turbine; using printing; power generation ... See more keywords
The efficacy of using 3D printing models in the treatment of fractures: a randomised clinical trial
Sign Up to like & getrecommendations! Published in 2019 at "BMC Musculoskeletal Disorders"
DOI: 10.1186/s12891-019-2448-9
Abstract: BackgroundThe aim of this study was to evaluate the efficacy of the use of three-dimensional (3D) printing models for preoperative planning in cases of complex fracture.MethodsIn total, 48 patients with AO type C fractures of… read more here.
Keywords: using printing; clinical trial; treatment; printing ... See more keywords
Patient satisfaction with conventional dentures vs. digital dentures fabricated using 3D-printing: A randomized crossover trial.
Sign Up to like & getrecommendations! Published in 2022 at "Journal of prosthodontic research"
DOI: 10.2186/jpr.jpr_d_21_00048
Abstract: PURPOSE Evidence regarding the performance of digital dentures (DDs) fabricated using 3D printing is insufficient. This study aimed to evaluate patient satisfaction with conventional dentures (CDs) and DDs fabricated using 3D printing. METHODS This randomized… read more here.
Keywords: using printing; fabricated using; satisfaction conventional; patient satisfaction ... See more keywords
Nanogels for Pharmaceutical and Biomedical Applications and Their Fabrication Using 3D Printing Technologies
Sign Up to like & getrecommendations! Published in 2018 at "Materials"
DOI: 10.3390/ma11020302
Abstract: Nanogels are hydrogels formed by connecting nanoscopic micelles dispersed in an aqueous medium, which give an opportunity for incorporating hydrophilic payloads to the exterior of the micellar networks and hydrophobic payloads in the core of… read more here.
Keywords: applications fabrication; using printing; fabrication using; pharmaceutical biomedical ... See more keywords
Preparation of Artificial Pavement Coarse Aggregate Using 3D Printing Technology
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15041575
Abstract: Coarse aggregate is the main component of asphalt mixtures, and differences in its morphology directly impact road performance. The utilization of standard aggregates can benefit the standard design and performance improvement. In this study, 3D… read more here.
Keywords: using printing; printing technology; aggregate; artificial aggregates ... See more keywords