Photo from archive.org
Sign Up to like & get
recommendations!
1
Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2017.11.065
Abstract: Abstract Al/B 4 C composites with various volume contents of B 4 C (5%, 10%, 15%, 20%, and 25%) reinforcing the Al matrix, have been fabricated by vacuum hot press sintering at 680 °C, with a…
read more here.
Keywords:
vol composites;
microtopography mechanical;
properties vacuum;
vacuum hot ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2021 at "Materials Letters"
DOI: 10.1016/j.matlet.2021.129758
Abstract: Abstract The TiNiNb pre-alloyed powder prepared after mechanical alloying was used as experimental material, and TiNiNb alloy was prepared by vacuum hot pressing sintering method (temperature 900℃, pressure 35 MPa, vacuum degree 1.6×10-3 Pa). The…
read more here.
Keywords:
vacuum hot;
tininb alloy;
hot pressing;
pressing sintering ... See more keywords
Photo from academic.microsoft.com
Sign Up to like & get
recommendations!
0
Published in 2017 at "Vacuum"
DOI: 10.1016/j.vacuum.2017.05.024
Abstract: Abstract The NiCrAlY-Mo-Ag composite was fabricated by vacuum hot-pressing sintering. The friction and wear behaviour of the composite were investigated from room temperature to 900 °C. Furthermore, the wear mechanism was studied over this wide range…
read more here.
Keywords:
properties nicraly;
tribological properties;
nicraly composite;
vacuum hot ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2018 at "Vacuum"
DOI: 10.1016/j.vacuum.2018.03.012
Abstract: Abstract The molybdenum alloys doped with different contents (0.3, 0.6, 0.9, 1.5 and 2.5 wt %) La 2 O 3 were prepared via solid-solid doping method followed by vacuum hot-pressing sintering. SEM observation and laser diffraction…
read more here.
Keywords:
vacuum hot;
pressing sintering;
size;
solid doping ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2020 at "Materials Research Express"
DOI: 10.1088/2053-1591/ab6c19
Abstract: The cermet based on metallic iron with zirconia toughened alumina (ZTA) as the reinforcing phase was 15 prepared by vacuum hot-pressed sintering. The ZTA particles were subjected to electroless nickel 16 plating to improve the…
read more here.
Keywords:
vacuum hot;
zta cermet;
zta particles;
prepared vacuum ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
2
Published in 2023 at "Materials"
DOI: 10.3390/ma16020571
Abstract: The existing process for the preparation of cladded rebars is too complicated for large-scale industrial production. Therefore, this paper proposes a 55#/316L rebar preparation method based on vacuum hot rolling. The microstructure and mechanical properties…
read more here.
Keywords:
microstructure properties;
rebar;
vacuum hot;
interface microstructure ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2023 at "Materials"
DOI: 10.3390/ma16041473
Abstract: Ni-20Cr-Eu2O3 composites were designed as new control rod materials and were synthesized from Ni, Cr, and Eu2O3 mixture powders via ball milling and vacuum hot pressing. During ball milling, Eu2O3 was fined, nano-crystallized, amorphized, and…
read more here.
Keywords:
eu2o3;
hot pressing;
20cr eu2o3;
vacuum hot ... See more keywords
Sign Up to like & get
recommendations!
2
Published in 2023 at "Metals"
DOI: 10.3390/met13061029
Abstract: In this study, the bonding of a CuW/Al composite with a Ni interlayer was designed and established by vacuum hot-pressing diffusion bonding. The interfacial microstructure was systematically discussed based on experimental characterization and first-principles calculations.…
read more here.
Keywords:
cuw composite;
diffusion;
hot pressing;
vacuum hot ... See more keywords