High speed grinding characteristics and machinability of WC-10Co-4Cr coatings deposited via high velocity oxygen fuel spraying
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Mechanical Science and Technology"
DOI: 10.1007/s12206-018-0630-x
Abstract: Tungsten carbide cobalt coatings are widely employed for fabricating the parts used in corrosive and abrasive environments. The coatings are often deposited on substrates via high velocity oxygen fuel spraying, which are relatively hard and… read more here.
Keywords: high speed; high velocity; speed; velocity oxygen ... See more keywords
Microstructure and properties of high velocity oxygen fuel sprayed (WC-Co)-Ni coatings
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.03.021
Abstract: Abstract The (WC-Co)-Ni composite coatings were fabricated by high velocity oxygen fuel (HVOF) spraying process using (WC-Co)-Ni powders prepared through blending agglomerated WC-Co powder with Ni powder. Microstructure and phase composition of the coatings deposited… read more here.
Keywords: high velocity; velocity oxygen; oxygen fuel;
The study of mechanical properties and corrosion behavior of the Fe-based amorphous alloy coatings using high velocity oxygen fuel spraying
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2021.159132
Abstract: Abstract The Fe-based amorphous alloy powders Fe40-Cr19-Mo18-C15-B8 are sprayed on 316 stainless steel substrates by high velocity oxygen fuel spraying (HVOF) process. The microstructure of coatings are analyzed by XRD, SEM, XPS and TEM. The… read more here.
Keywords: velocity oxygen; fuel spraying; oxygen fuel; based amorphous ... See more keywords
The Surface Properties of WC-Co-Cr Based Coatings Deposited by High Velocity Oxygen Fuel Spraying
Sign Up to like & getrecommendations! Published in 2017 at "Acta Physica Polonica A"
DOI: 10.12693/aphyspola.131.186
Abstract: The aim of this research was to investigate microstructural and mechanical properties of the WC–Co–Cr coatings by high velocity oxygen fuel spraying. Woka 3653 (WC10Co4Cr) powder was used as coating material. This powder is widely… read more here.
Keywords: microscopy; high velocity; oxygen fuel; velocity oxygen ... See more keywords
Mechanical Properties of Cobalt-based Alloy Coating Applied Using High-velocity Oxygen Gas and Liquid Fuel Spraying Processes
Sign Up to like & getrecommendations! Published in 2019 at "Sensors and Materials"
DOI: 10.18494/sam.2019.2166
Abstract: High-velocity flame thermal spraying technology is widely used to apply coatings on industrial and aerospace parts, because a high flame speed yields coatings with high bonding force, high density, and low porosity. In this study,… read more here.
Keywords: velocity oxygen; velocity; oxygen gas; fuel ... See more keywords