Resolving signal drift in the wall‐mounted camera of the RGSC system
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Applied Clinical Medical Physics"
DOI: 10.1002/acm2.14291
Abstract: Abstract Purpose To present a modified calibration method to reduce signal drift due to table sagging in Respiratory Gating for Scanner (RGSC) systems with a wall‐mounted camera. Materials and Methods Approximately 70 kg of solid… read more here.
Keywords: drift; wall mounted; mounted camera; rgsc ... See more keywords
Experimental and computational investigation of wall-mounted displacement induction ventilation system
Sign Up to like & getrecommendations! Published in 2021 at "Energy and Buildings"
DOI: 10.1016/j.enbuild.2021.110937
Abstract: Abstract Traditional displacement ventilation (DV) creates high indoor air quality in occupied zone in cooling season due to thermal plume created by heat sources which then effectively purge contaminants out of the breathing zone, but… read more here.
Keywords: system; ventilation; mounted displacement; displacement induction ... See more keywords
Flow structure of a low aspect ratio wall-mounted airfoil operating in a low Reynolds number flow
Sign Up to like & getrecommendations! Published in 2018 at "Experimental Thermal and Fluid Science"
DOI: 10.1016/j.expthermflusci.2018.07.019
Abstract: Abstract Measurements on a wall-mounted NACA 0012 airfoil with an aspect ratio ( A R ) of 0.5 operating in the low Reynolds number (274,000, based on chord) regime were performed. Measurements included oil flow… read more here.
Keywords: span; aspect ratio; wall mounted; flow ... See more keywords
Modulation of aerodynamic characteristics of a finite wall-mounted square cylinder through steady jet injection
Sign Up to like & getrecommendations! Published in 2020 at "Experimental Thermal and Fluid Science"
DOI: 10.1016/j.expthermflusci.2019.109976
Abstract: Abstract This paper presents the results of an experimental study that investigates the flow behavior around a finite wall-mounted square cylinder (with the aspect ratio of AR = 7) subjected to a steady jet issued from the… read more here.
Keywords: finite wall; mounted square; wall mounted; square cylinder ... See more keywords
Turbulent kinetic energy budget in a wall-mounted cylinder wake using PIV measurements
Sign Up to like & getrecommendations! Published in 2020 at "Ocean Engineering"
DOI: 10.1016/j.oceaneng.2020.107582
Abstract: Abstract In high flow velocity areas, turbulence intensity is high and flow variations may have a major impact on tidal turbines behaviour. Previous studies show that a square wall-mounted cylinder produces a very extended and… read more here.
Keywords: energy; wall mounted; mounted cylinder; piv measurements ... See more keywords
The aeroacoustics of finite wall-mounted square cylinders
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Fluid Mechanics"
DOI: 10.1017/jfm.2017.682
Abstract: This paper presents the results of an experimental study that relates the flow structures in the wake of a square finite wall-mounted cylinder with the radiated noise. Acoustic and hot-wire measurements were taken in an… read more here.
Keywords: finite wall; wall mounted; aspect ratios; cylinder ... See more keywords
Dynamics of wall-mounted tandem flexible plates with unequal lengths in a laminar boundary layer
Sign Up to like & getrecommendations! Published in 2025 at "Journal of Fluid Mechanics"
DOI: 10.1017/jfm.2025.10505
Abstract: Abstract This study presents a numerical investigation of wall-mounted tandem flexible plates with unequal lengths in a laminar boundary layer flow, examining both two-dimensional (2-D) and three-dimensional (3-D) configurations. Key parameters influencing the system include… read more here.
Keywords: plates unequal; mounted tandem; flexible plates; wall mounted ... See more keywords
Flow characteristics and scaling past highly porous wall-mounted fences
Sign Up to like & getrecommendations! Published in 2017 at "Physics of Fluids"
DOI: 10.1063/1.4995307
Abstract: An extensive characterization of the flow past wall-mounted highly porous fences based on single- and multi-scale geometries has been performed using hot-wire anemometry in a low-speed wind tunnel. Whilst drag properties (estimated from the time-averaged… read more here.
Keywords: wall mounted; wall; flow characteristics; characteristics scaling ... See more keywords
Geometry effects on mean wake topology and large-scale coherent structures of wall-mounted prisms
Sign Up to like & getrecommendations! Published in 2019 at "Physics of Fluids"
DOI: 10.1063/1.5126045
Abstract: Turbulent wake behind five wall-mounted rectangular prisms is measured by time-resolved particle-image velocimetry with an aim to generalize the effects of prism geometry (in terms of aspect ratio, AR, and side ratio, SR) on the… read more here.
Keywords: mode; mean wake; wall mounted; topology ... See more keywords
Direct numerical simulation of laminar boundary layer interaction with a wall-mounted circular cylinder at low-Reynolds number
Sign Up to like & getrecommendations! Published in 2024 at "Physics of Fluids"
DOI: 10.1063/5.0217885
Abstract: In our current study, we employ direct numerical simulation to investigate the interaction between a laminar boundary layer flow and a wall-mounted circular cylinder with an aspect ratio of 4 and a Reynolds number of… read more here.
Keywords: wall mounted; mounted circular; reynolds number; boundary layer ... See more keywords
Large-Eddy Simulations of Flow over a Backward-Facing Ramp with a Wall-Mounted Cube
Sign Up to like & getrecommendations! Published in 2024 at "AIAA Journal"
DOI: 10.2514/1.j063803
Abstract: Passive flow control devices, such as vortex generators (VGs), can effectively modulate the turbulent boundary layer flow near regions of adverse pressure gradients, but the interactions between the salient flow structures produced by VGs and… read more here.
Keywords: backward facing; large eddy; facing ramp; wall mounted ... See more keywords