Boosting phosphorus–nitrogen–silicon synergism through introducing graphene nanobrick wall structure for fabricating multifunctional cotton fabric by spray assisted layer-by-layer assembly
Sign Up to like & getrecommendations! Published in 2020 at "Cellulose"
DOI: 10.1007/s10570-020-03235-1
Abstract: Abstract Efficient construction of quaternary composite coating on cotton fabric was presented by spraying aqueous solutions of graphene oxide, 3-aminopropyl triethoxysilane, sodium alginate and ammonium polyphosphate for providing the flame retardant, antimicrobial and antistatic properties.… read more here.
Keywords: nanobrick wall; cotton fabric; wall structure; phosphorus nitrogen ... See more keywords
Microstructure Evolution and Mechanical Property Anisotropy of Wire and Arc-Additive-Manufactured Wall Structure Using ER2319 Welding Wires
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-05336-1
Abstract: ER2319 welding wires were used to fabricate a wall structure using CMT-PAdv-based wire and arc additive manufacturing (WAAM). Heat treatment was used after the WAAM process. The microstructure and mechanical property anisotropy before and after… read more here.
Keywords: heat; wall structure; heat treatment; mechanical property ... See more keywords
An optimal dimensioning method of a green wall structure for noise pollution reduction
Sign Up to like & getrecommendations! Published in 2021 at "Building and Environment"
DOI: 10.1016/j.buildenv.2020.107362
Abstract: Abstract This paper concern the optimization of a multilayered green wall structure including substrate and foliage in order to reduce as much as possible backward noise reflection and forward transmission from the wall. Each component… read more here.
Keywords: optimal dimensioning; green wall; wall; noise ... See more keywords
Assessment of gastric wall structure using ultra-high-resolution computed tomography.
Sign Up to like & getrecommendations! Published in 2021 at "European journal of radiology"
DOI: 10.1016/j.ejrad.2021.110067
Abstract: PURPOSE To evaluate the image quality of ultra-high-resolution CT (U-HRCT) in the comparison among four different reconstruction methods, focusing on the gastric wall structure, and to compare the conspicuity of a three-layered structure of the… read more here.
Keywords: image; hrct; wall structure; gastric wall ... See more keywords
Influence of cell wall structure on the fracture behavior of bamboo (Phyllostachys edulis) fibers
Sign Up to like & getrecommendations! Published in 2020 at "Industrial Crops and Products"
DOI: 10.1016/j.indcrop.2020.112787
Abstract: Abstract To improve the fundamental understanding of the fracture behavior of bamboo, this study was conducted to evaluate the fracture modes of bamboo fibers pertaining to their cell wall microstructure. The tension fractured fibers were… read more here.
Keywords: fracture; wall structure; fracture behavior; cell wall ... See more keywords
Combined application of GPR and ERT for the assessment of a wall structure at the Heptapyrgion fortress (Thessaloniki, Greece)
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Applied Geophysics"
DOI: 10.1016/j.jappgeo.2018.04.003
Abstract: Abstract Non-destructive investigation of monuments can be an extremely valuable tool to evaluate potential structural defects and assist in developing any restoration plans. In this work, both Ground Penetrating Radar (GPR) and Electrical Resistivity Tomography… read more here.
Keywords: gpr ert; gpr; thessaloniki greece; wall structure ... See more keywords
Thermal inactivation kinetics of pectin methylesterase and the impact of thermal treatment on the texture, electrical impedance characteristics and cell wall structure of Japanese radish (Raphanus sativus L.)
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Food Engineering"
DOI: 10.1016/j.jfoodeng.2016.12.001
Abstract: Abstract The thermal inactivation characteristics of pectin methylesterase (PME) from Japanese radish were described by the fractional conversion model at temperatures between 50 and 70 °C. The calculated values of the inactivation rate constant k exhibited… read more here.
Keywords: wall structure; pectin methylesterase; japanese radish; thermal inactivation ... See more keywords
Microstructure and mechanical properties of thin-wall structure by hybrid laser metal deposition and laser remelting process
Sign Up to like & getrecommendations! Published in 2020 at "Optics and Laser Technology"
DOI: 10.1016/j.optlastec.2020.106087
Abstract: Abstract Laser remelting (LR) is generally applied to the coating or selective laser melting process to improve the surface quality and density of the formed structure. However, the effect of LR treatment on each cladding… read more here.
Keywords: thin wall; wall structure; process; laser ... See more keywords
Experimental verification of novel double-wall structure with pin-fins and slots
Sign Up to like & getrecommendations! Published in 2024 at "Physics of Fluids"
DOI: 10.1063/5.0217369
Abstract: This Letter proposes a novel double-wall structure with pin-fins and slot holes. The overall cooling effectiveness and characteristics of flow field at the slot outlet are verified by infrared thermal imager and particle image velocimetry… read more here.
Keywords: double wall; pin fins; wall structure; structure pin ... See more keywords
Microscopic evaluation of charged domain wall structure in niobium-based piezoceramics
Sign Up to like & getrecommendations! Published in 2024 at "Applied Physics Letters"
DOI: 10.1063/5.0228587
Abstract: In this study, we investigated the charged domain wall structure of lead-free piezoceramics (Na0.55K0.45)NbO3 using multiple microscopy techniques. It was found that the oxygen partial pressure during sintering affected the volatilization of A2O (A = Na, K),… read more here.
Keywords: charged domain; microscopic evaluation; domain wall; wall structure ... See more keywords
Research on Load Bearing and Deformation Behavior of “Pile–Wall” Retaining Structure
Sign Up to like & getrecommendations! Published in 2024 at "Advances in Civil Engineering"
DOI: 10.1155/2024/8890462
Abstract: The “pile–wall” structure, which considers conventional temporary retaining piles as parts of the underground structure in the normal working stage, has been practiced, but there are insufficient studies on the optimization of the design of… read more here.
Keywords: retaining; research; wall structure; wall ... See more keywords