Crystallinity Change and Reduced Warpages on Thin Walled Parts-the Effect of Nano Fumed Silica on Polyacetal
Sign Up to like & getrecommendations! Published in 2020 at "Silicon"
DOI: 10.1007/s12633-020-00796-5
Abstract: Polyacetal is widely used in thin walled injection moulding due to its high mechanical properties. But, its widespread application is limited due to volumetric shrinkage and warpage. The investigations on reducing warpage on Polyacetal is… read more here.
Keywords: crystallinity; fumed silica; nano fumed; walled parts ... See more keywords
Deflection prediction of micro-milling Inconel 718 thin-walled parts
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2020.117003
Abstract: Abstract In the interest of lowering form factors and increasing specific strengths, there has been a great increase in the applications of micro thin-walled parts in many fields, such as medical devices, aerospace and so… read more here.
Keywords: inconel 718; deflection; walled parts; micro milling ... See more keywords
Investigation into the influence of laser energy input on selective laser melted thin-walled parts by response surface method
Sign Up to like & getrecommendations! Published in 2018 at "Optics and Lasers in Engineering"
DOI: 10.1016/j.optlaseng.2017.11.011
Abstract: Abstract Selective laser melting (SLM) provides a feasible way for manufacturing of complex thin-walled parts directly, however, the energy input during SLM process, namely derived from the laser power, scanning speed, layer thickness and scanning… read more here.
Keywords: selective laser; laser; walled parts; thin walled ... See more keywords
Online Chatter Identification for Thin-Walled Parts Machining Based on Improved Multisensor Signal Fusion and Multiscale Entropy
Sign Up to like & getrecommendations! Published in 2023 at "IEEE Transactions on Instrumentation and Measurement"
DOI: 10.1109/tim.2023.3267358
Abstract: Thin-walled workpieces frequently appear to chatter during milling, causing the creation of vibration patterns on the surface of the workpiece, which affects the machining quality and workpiece performance. Identification of online chatter is important for… read more here.
Keywords: walled parts; identification; thin walled; vibration ... See more keywords
Simulations and Experiments on Vibration Control of Aerospace Thin-Walled Parts via Preload
Sign Up to like & getrecommendations! Published in 2017 at "Shock and Vibration"
DOI: 10.1155/2017/8135120
Abstract: Thin-walled parts primarily comprise the entire piece of rough machining, and the material removal rate can surpass 95%. Numerous components with thin-walled structures are preferred in the aerospace industry for their light weight, high strength,… read more here.
Keywords: aerospace thin; vibration; walled parts; thin walled ... See more keywords
Machining-path mapping from free-state to clamped-state for thin-walled parts
Sign Up to like & getrecommendations! Published in 2022 at "Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture"
DOI: 10.1177/09544054221076987
Abstract: Thin-walled parts with curved surface are widely used in industrial applications and the high-quality machining is still a major problem because of the low stiffness. By using the machining-path obtained from the design model of… read more here.
Keywords: machining path; state; thin walled; walled parts ... See more keywords
Effect of temperature on milling stability of thin-walled parts
Sign Up to like & getrecommendations! Published in 2022 at "Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture"
DOI: 10.1177/09544054221101752
Abstract: Milling, as a common machining method, is widely used in rough machining and final finishing of various materials. In this paper, according to the milling temperature produced in the milling process, the formula of heat… read more here.
Keywords: milling stability; walled parts; temperature; stability thin ... See more keywords
Deformation Prediction and Experimental Study of 316L Stainless Steel Thin-Walled Parts Processed by Additive-Subtractive Hybrid Manufacturing
Sign Up to like & getrecommendations! Published in 2021 at "Materials"
DOI: 10.3390/ma14195582
Abstract: The hybrid process integrates two or more different processes, such as additive and subtractive manufacturing, which have gained appreciable consideration in recent years. The deformation of hybrid manufacturing is an essential factor affecting machining quality.… read more here.
Keywords: hybrid manufacturing; walled parts; thin walled; deformation ... See more keywords