Articles with "waste plastics" as a keyword



Photo from wikipedia

Current Developments in the Chemical Upcycling of Waste Plastics Using Alternative Energy Sources.

Sign Up to like & get
recommendations!
Published in 2021 at "ChemSusChem"

DOI: 10.1002/cssc.202100874

Abstract: The management of plastics waste is one of the most urgent and significant global problems now. Historically, waste plastics have been predominantly discarded, mechanically recycled, or incinerated for energy production. However, these approaches typically relied… read more here.

Keywords: waste plastics; energy; upcycling waste; chemical upcycling ... See more keywords
Photo from archive.org

Pyrolysis of low-density polyethylene waste plastics using mixtures of catalysts

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of Material Cycles and Waste Management"

DOI: 10.1007/s10163-020-01028-z

Abstract: In the present paper, LDPE has been pyrolysed in a 1 m length semi pilot reactor at temperature range 550–650 °C for around 2 h. Commercial bentonite, kaoline, silica Gel and activated charcoal have been used as catalyst.… read more here.

Keywords: pyrolysis low; polyethylene waste; plastics using; density polyethylene ... See more keywords
Photo by riccardo__oliva from unsplash

The use of plastic waste in asphalt: A critical review on asphalt mix design and Marshall properties

Sign Up to like & get
recommendations!
Published in 2021 at "Construction and Building Materials"

DOI: 10.1016/j.conbuildmat.2021.125185

Abstract: Abstract Waste plastics are a growing concern for society and need sustainable strategies to deal with. One of the promising strategies is to use them as a replacement of virgin polymers for asphalt mixture modifications.… read more here.

Keywords: use plastic; asphalt mix; waste; waste plastics ... See more keywords
Photo from wikipedia

Evaluating the potential of waste plastics as fuel in cement kilns using bench-scale emissions analysis

Sign Up to like & get
recommendations!
Published in 2017 at "Fuel"

DOI: 10.1016/j.fuel.2016.12.054

Abstract: Abstract In an effort to reduce emissions and lower fuel costs, cement plants have explored the use of waste materials to displace coal and petroleum coke. A potential candidate is non-recyclable waste plastics. Knowledge of… read more here.

Keywords: waste; cement; fuel; bench scale ... See more keywords

Fuel oil generated from the cogon grass-derived Al–Si (Imperata cylindrica (L.) Beauv) catalysed pyrolysis of waste plastics

Sign Up to like & get
recommendations!
Published in 2019 at "Heliyon"

DOI: 10.1016/j.heliyon.2019.e02324

Abstract: This research investigated pyrolysis as a potential method to manage plastic waste in Sichang Island, Thailand. Pyrolysis was chosen to convert waste plastic into fuel oil using Al–Si catalysts derived from cogon grass. The study… read more here.

Keywords: cogon grass; pyrolysis; waste; oil ... See more keywords
Photo from wikipedia

Repurposing waste plastics into cleaner asphalt pavement materials: A critical literature review

Sign Up to like & get
recommendations!
Published in 2021 at "Journal of Cleaner Production"

DOI: 10.1016/j.jclepro.2020.124355

Abstract: Abstract Current practice of recycled waste plastics includes 7 major types: polyethylene terephthalate (PETE), high-density polyethylene (HDPE), polyvinyl chloride (PVC), low-density polyethylene (LDPE), polypropylene (PP), polystyrene (PS), and others such as acrylonitrile butadiene styrene (ABS),… read more here.

Keywords: performance; waste; asphalt pavement; repurposing waste ... See more keywords
Photo from wikipedia

A discrimination model in waste plastics sorting using NIR hyperspectral imaging system.

Sign Up to like & get
recommendations!
Published in 2018 at "Waste management"

DOI: 10.1016/j.wasman.2017.10.015

Abstract: Classification of plastics is important in the recycling industry. A plastic identification model in the near infrared spectroscopy wavelength range 1000-2500 nm is proposed for the characterization and sorting of waste plastics using acrylonitrile butadiene styrene… read more here.

Keywords: hyperspectral imaging; waste; model; imaging system ... See more keywords
Photo from wikipedia

Separation of mixed waste plastics via magnetic levitation.

Sign Up to like & get
recommendations!
Published in 2018 at "Waste management"

DOI: 10.1016/j.wasman.2018.02.051

Abstract: Separation becomes a bottleneck of dealing with the enormous stream of waste plastics, as most of the extant methods can only handle binary mixtures. In this paper, a novel method that based on magnetic levitation… read more here.

Keywords: separation; mixed waste; magnetic levitation; waste plastics ... See more keywords
Photo from wikipedia

Bimetallic carbon nanotube encapsulated Fe-Ni catalysts from fast pyrolysis of waste plastics and their oxygen reduction properties.

Sign Up to like & get
recommendations!
Published in 2020 at "Waste management"

DOI: 10.1016/j.wasman.2020.05.003

Abstract: Carbon-based bimetallic electrocatalysts were obtained by catalytic pyrolysis of waste plastics with Fe-Ni-based catalysts and were used as efficient oxygen reduction reaction (ORR) catalysts in this study. The prepared iron-nickel alloy nanoparticles encapsulated in oxidized… read more here.

Keywords: oxygen reduction; pyrolysis waste; carbon; waste plastics ... See more keywords
Photo from wikipedia

High quality liquid fuel production from waste plastics via two-step cracking route in a bottom-up approach using bi-functional Fe/HZSM-5 catalyst.

Sign Up to like & get
recommendations!
Published in 2021 at "Waste management"

DOI: 10.1016/j.wasman.2021.07.024

Abstract: Plastic waste is a serious menace to the world due to its fastest growth rate of ~ 5% per annum and requires efficient technologies for its safe disposal. Plastic liquefaction producing liquid hydrocarbons is an effective way… read more here.

Keywords: liquid; waste; two step; via two ... See more keywords
Photo from wikipedia

Copyrolysis of Low-Grade Indian Coal and Waste Plastics: Future Prospects of Waste Plastic as a Source of Fuel

Sign Up to like & get
recommendations!
Published in 2018 at "Energy & Fuels"

DOI: 10.1021/acs.energyfuels.7b03298

Abstract: Copyrolysis of waste plastics with different materials, viz. coal, biomass is an ecofriendly and industrially acceptable waste management technique. In the present study, an attempt has been made to produce value-added products by utilizing waste… read more here.

Keywords: waste; waste plastic; indian coal; coal ... See more keywords