The effect of high wear diets on the relative pulp volume of the lower molars.
Sign Up to like & getrecommendations! Published in 2021 at "American journal of physical anthropology"
DOI: 10.1002/ajpa.24242
Abstract: OBJECTIVES One role of dental pulp is in the upkeep and maintenance of dentine. Under wear, odontoblasts in the pulp deposit tertiary dentine to ensure the sensitive internal dental tissues are not exposed and vulnerable… read more here.
Keywords: volume; taxa consume; wear; dental pulp ... See more keywords
Effective wear coefficient and wearing-in period for a functionally graded wear-resisting punch
Sign Up to like & getrecommendations! Published in 2019 at "Acta Mechanica"
DOI: 10.1007/s00707-019-2366-9
Abstract: A two-dimensional wear contact problem for an elastic layer and a wear-resisting punch is considered. The contact area and the contact load are assumed to be fixed, whereas the punch’s shape changes according to Archard’s… read more here.
Keywords: wearing period; resisting punch; wear; wear resisting ... See more keywords
Influence of the Adhesion Force and Strain Hardening Coefficient of the Material on the Rate of Adhesive Wear in a Dry Tangential Frictional Contact
Sign Up to like & getrecommendations! Published in 2019 at "Russian Physics Journal"
DOI: 10.1007/s11182-019-01857-y
Abstract: In the paper, we consider the tangential contact of single microasperities of the interacting surfaces the mechanical characteristics of which are close to the characteristics of typical rail steels. Using computer simulation by the method… read more here.
Keywords: adhesion; wear; hardening coefficient; material ... See more keywords
Relationship Between Nanoindentation and Wear Properties of Stainless Steel-Reinforced Aluminium Matrix Composite
Sign Up to like & getrecommendations! Published in 2017 at "Tribology Letters"
DOI: 10.1007/s11249-017-0950-5
Abstract: Abstract304 Stainless steel (SS)-reinforced A356 aluminium matrix composites were manufactured by melt infiltration casting. Recycled SS shavings were pressed to obtain porous monoblock preform, and molten Al alloy was infiltrated into vacancies of the preform… read more here.
Keywords: aluminium matrix; wear; steel reinforced; stainless steel ... See more keywords
The Competing Effects of Counterface Peaks and Valleys on the Wear and Transfer of Ultra-Low Wear Alumina–PTFE
Sign Up to like & getrecommendations! Published in 2017 at "Tribology Letters"
DOI: 10.1007/s11249-017-0966-x
Abstract: The wear rates of tribological polymers are strongly influenced by counterface roughness through competing mechanisms such as polymer abrasion by counterface asperities and mechanical engagement of debris into the features of the rough surface. Previous… read more here.
Keywords: alumina ptfe; low wear; ultra low; wear ... See more keywords
Slippery Wood: Low Friction and Low Wear of Modified Beech Wood
Sign Up to like & getrecommendations! Published in 2020 at "Tribology Letters"
DOI: 10.1007/s11249-020-01297-7
Abstract: This paper investigates the tribological and related properties of naturally modified beech wood ( Fagus sylvatica ). The modifications were performed on steamed beech wood using a variety of treatments consisting of drying, heating in… read more here.
Keywords: modified beech; low friction; wear; beech wood ... See more keywords
High-Temperature Friction and Wear Features of Nickel-Based Single Crystal Superalloy
Sign Up to like & getrecommendations! Published in 2020 at "Tribology Letters"
DOI: 10.1007/s11249-020-1266-4
Abstract: Abstract The nickel-based single crystal (NBSC) superalloy has been widely used in aero engines, gas turbines, and other power plants due to its excellent high-temperature performance. During the working process, wear often occurs on the… read more here.
Keywords: temperature; single crystal; wear; superalloy ... See more keywords
Study on Tribological Properties of CoCrMo Alloys against Metals and Ceramics as Bearing Materials for Artificial Cervical Disc
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3158-4
Abstract: CoCrMo alloys are believed to be a kind of potential material for artificial cervical disc. However, the tribological properties of CoCrMo alloys against different metals and ceramics are not systematically studied. In this study, the… read more here.
Keywords: tribological properties; wear; cocrmo alloys; cervical disc ... See more keywords
Tribological Behavior and Wear Mechanism of TZ20 Titanium Alloy After Various Treatments
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3570-9
Abstract: Abrasion is one of the most common failure forms of metals and alloys. The study of the friction and wear behavior of metals and alloys is greatly beneficial to improve their long life and safe… read more here.
Keywords: various treatments; wear; wear mechanism; normal load ... See more keywords
Microstructure, Tribological Performance, and Wear Mechanism of Cr- and Mo-Reinforced FeSiB Coatings by Laser Cladding
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-05187-w
Abstract: FeSiB coatings with the additions of Cr and Mo were fabricated on S355 steel using a laser cladding. The surface and cross section morphologies, chemical elementals, phases and valences of obtained coatings were analyzed using… read more here.
Keywords: fesib coatings; wear; laser cladding; performance ... See more keywords
Abrasive-Erosive Wear of Thermally Sprayed Coatings from Experimental and Commercial Cr3C2-Based Powders
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-017-0638-2
Abstract: In this paper, high-velocity oxy-fuel sprayed coatings from experimental Cr3C2-Ni powder produced by mechanically activated thermal synthesis and disintegrator milling are compared with coatings from commercial Cr3C2-NiCr powder under room- and elevated-temperature abrasive-erosive wear (AEW)… read more here.
Keywords: temperature; coatings experimental; wear; commercial cr3c2 ... See more keywords