Synthesis of Cu-10Sn/SiC Metal Matrix Composites and Experimental Investigation of its Adhesive Wear Behaviour
Sign Up to like & getrecommendations! Published in 2018 at "Silicon"
DOI: 10.1007/s12633-018-9848-6
Abstract: The objective is to fabricate Cu-10Sn alloy and its composites reinforced with varying wt% of SiC (5, 10 and 15) to investigate its dry sliding wear behaviour. Microstructural analysis for composites revealed well dispersed SiC… read more here.
Keywords: sic composite; synthesis 10sn; matrix; 10sn sic ... See more keywords
Wear Behaviour of Al-Silicon (LM13) Alloy Composite Reinforcement with TiC and ZrSiO4 Particles
Sign Up to like & getrecommendations! Published in 2019 at "Silicon"
DOI: 10.1007/s12633-019-00114-8
Abstract: This paper mainly reports a relative description, impacts of TiC and ZrSiO4 grains, blending extents on the slurry wear qualities and microstructural analysis of composite materials. The TiC/ZrSiO4 dual reinforced particles (DRP) of LM13 amalgam… read more here.
Keywords: composite reinforcement; tic zrsio4; zrsio4; wear behaviour ... See more keywords
Mechanical and Wear Behaviour of Hot-Pressed 304 stainless Steel Matrix Composites Containing TiB2 Particles
Sign Up to like & getrecommendations! Published in 2019 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-019-01588-1
Abstract: AbstractIn the present article, mechanical and wear behaviour of hot-pressed 304 stainless steel matrix composites containing 2 and 4 vol% TiB2 particles was investigated. A density of over 92% was achieved at optimum hot-pressing temperature and… read more here.
Keywords: steel matrix; tib2 particles; mechanical wear; matrix composites ... See more keywords
Microstructure and Wear Behaviour of SS420 Micron Layers on Ti–6Al–4V Substrate Using Laser Cladding Process
Sign Up to like & getrecommendations! Published in 2020 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-020-01927-7
Abstract: Ti–6Al–4V is commonly used material in automobile, aerospace, biomedical and marine due to its excellent properties. However, their uses are reduced because their its poor tribological performance. In the current study, stainless steel 420 alloy… read more here.
Keywords: laser; laser cladded; base material; material ... See more keywords
Characterization, Prediction, and Optimization of Dry Sliding Wear Behaviour of Al6061/WC Composites
Sign Up to like & getrecommendations! Published in 2020 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-020-02107-3
Abstract: This investigation deals with an experimental analysis done on dry sliding wear behaviour of aluminium matrix composites reinforced with WC (tungsten carbide) particles. The composites were processed through powder metallurgy (P/M) technique with the addition… read more here.
Keywords: dry sliding; sliding wear; optimization; wear behaviour ... See more keywords
Dry Sliding Wear Behaviour of T6-Aluminium Alloy Composites Compared with Existing Aircraft Brake Pads
Sign Up to like & getrecommendations! Published in 2021 at "Arabian Journal for Science and Engineering"
DOI: 10.1007/s13369-021-05770-w
Abstract: Current research investigates the effect of casehardening, plasma nitriding and T6 heat treatment condition on the dry sliding behaviour of microwave-assisted T6-AA2900-α-Al2O3composite material against aircraft disc material. Composite samples without post-treatment were also considered for… read more here.
Keywords: aircraft brake; dry sliding; aircraft; wear behaviour ... See more keywords
Evaluation and neural network prediction of the wear behaviour of SiC microparticle-filled epoxy resins
Sign Up to like & getrecommendations! Published in 2021 at "Journal of The Brazilian Society of Mechanical Sciences and Engineering"
DOI: 10.1007/s40430-021-02987-6
Abstract: One of the main advantageous characteristics of thermosetting resins, which enable to apply them as engineering plastics and as matrices for composite materials, is the possibility of optimising their properties in different ways. This work… read more here.
Keywords: neural network; evaluation neural; wear behaviour; network prediction ... See more keywords
Friction and wear behaviour of additively manufactured continuous carbon fibre reinforced PA6 composites
Sign Up to like & getrecommendations! Published in 2021 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2021.109332
Abstract: Abstract In the present work, continuous carbon fibre (CCF) reinforced polyamide 6 (PA6) composites were fabricated using the Fused Filament Fabrication (FFF) 3D printing technique. The sliding friction and wear behaviour of the printed CCF/PA6… read more here.
Keywords: continuous carbon; fibre; pa6 composites; wear behaviour ... See more keywords
Dry sliding wear behaviour of β-type Ti-Nb and Ti-Mo surfaces designed by diffusion treatments for biomedical applications.
Sign Up to like & getrecommendations! Published in 2019 at "Journal of the mechanical behavior of biomedical materials"
DOI: 10.1016/j.jmbbm.2018.12.029
Abstract: The dry sliding wear behaviour of different Ti-Nb and Ti-Mo surfaces was investigated in order to evaluate the role of Nb and Mo β-stabilizing elements in titanium wear resistance to consider them for biomedical applications.… read more here.
Keywords: applications dry; dry sliding; sliding wear; wear behaviour ... See more keywords
Effect of porosity on wear behaviour of remanufacturing Cr3C2-NiCr coatings under oil lubrication
Sign Up to like & getrecommendations! Published in 2020 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2020.02.184
Abstract: Abstract Remanufacturing is an advanced stage in the development of maintenance engineering and surface engineering, which is an important component of sustainable manufacturing. As a significant remanufacturing technology, thermal spraying is an important basis for… read more here.
Keywords: cr3c2 nicr; porosity; oil lubrication; wear behaviour ... See more keywords
Wear behaviour of TiAlN coated solid carbide end-mill under alumina enriched minimum quantity palm oil-based lubricating condition
Sign Up to like & getrecommendations! Published in 2020 at "Tribology International"
DOI: 10.1016/j.triboint.2020.106310
Abstract: Abstract The lubricating effect of alumina deposited palm oil was investigated during the end-milling of Inconel 690. Different volume concentration (0.3–1.5%) of alumina was reinforced into palm oil, and experimentally optimized concentration of alumina was… read more here.
Keywords: palm oil; end; behaviour tialn; wear behaviour ... See more keywords