Surface characteristics and wear depth profile of the TiN, TiAlN and AlCrN coated stainless steel in dry sliding wear condition
Sign Up to like & getrecommendations! Published in 2017 at "Surfaces and Interfaces"
DOI: 10.1016/j.surfin.2016.10.008
Abstract: Abstract Titanium nitride (TiN), titanium aluminum nitride (TiAlN), aluminum chromium nitride (AlCrN) are hard ceramic coating material. It is coated over stainless steel (SS304) and sliding against Ti–6Al–4V alloy by using cathodic arc deposition (CAD)… read more here.
Keywords: wear depth; tin; tialn; stainless steel ... See more keywords
Effect of Bionic Texture on Wear Resistance and Heat Dissipation Performance of Transmission Gear
Sign Up to like & getrecommendations! Published in 2025 at "Tribology Transactions"
DOI: 10.1080/10402004.2025.2488798
Abstract: Abstract Heat dissipation efficiency and wear resistance in the lubricated contact area should be optimized to enhance the service life of the gear. In this study, bionic gear samples were designed following bay scallop texture… read more here.
Keywords: wear depth; ordinary gears; arc groove; groove gears ... See more keywords
Abrasive grit size effect on wear depth of stir cast hybrid Al–Mg–Si composites at high stress condition
Sign Up to like & getrecommendations! Published in 2018 at "Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology"
DOI: 10.1177/1350650117726182
Abstract: The grit size effect on high stress abrasive wear depth of stir cast hybrid self-lubricating Gr/SiC/Al composites was investigated in both as cast (AC) and heat treated (T6) condition. The tests were done at grit… read more here.
Keywords: wear depth; grit; condition; size effect ... See more keywords
Numerical analysis of fretting wear in lateral contact of sphere/sphere
Sign Up to like & getrecommendations! Published in 2021 at "Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology"
DOI: 10.1177/1350650120983677
Abstract: The fretting wear characteristics of spherical/spherical lateral contacts under different load conditions, contact angles, and the number of fretting cycles are studied. A spherical/spherical lateral fretting wear model is established in ABAQUS software. A UMESHMOTION… read more here.
Keywords: wear depth; increase; area; portion ... See more keywords
Wear prediction considering dynamic load for spur gear in mixed elastohydrodynamic lubrication
Sign Up to like & getrecommendations! Published in 2022 at "Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology"
DOI: 10.1177/13506501221134998
Abstract: In this work, a wear prediction model considering the dynamic load is proposed for spur gears in mixed elastohydrodynamic lubrication (EHL). The dynamic load is calculated by gear dynamic model. Combining gear wear model and… read more here.
Keywords: dynamic load; mixed elastohydrodynamic; wear prediction; considering dynamic ... See more keywords
Markov stochastic process modeling for evolution of wear depth in steam generator tubes
Sign Up to like & getrecommendations! Published in 2019 at "Advances in Mechanical Engineering"
DOI: 10.1177/1687814019846256
Abstract: Reliability of steam generator is a serious concern in the operation of nuclear power plants, especially for steam generator tubes that experience a variety of degradation mechanisms including wear damage. It is necessary to develop… read more here.
Keywords: wear depth; generator tubes; steam generator;
The Prediction of Wear Depth Based on Machine Learning Algorithms
Sign Up to like & getrecommendations! Published in 2024 at "Lubricants"
DOI: 10.3390/lubricants12020034
Abstract: In this work, ball-on-disk wear experiments were carried out on different wear parameters such as sliding speed, sliding distance, normal load, temperature, and oil film thickness. In total, 81 different sets of wear depth data… read more here.
Keywords: wear depth; prediction wear; machine learning; machine ... See more keywords
Study on the tooth surface wear characteristics of helical gears under mixed elastohydrodynamic lubrication
Sign Up to like & getrecommendations! Published in 2025 at "Mechanical Sciences"
DOI: 10.5194/ms-16-565-2025
Abstract: Abstract. Existing research on tooth surface wear of helical gears has insufficiently considered the complex and variable lubrication conditions between meshing tooth surfaces. This study constructed a mixed elastohydrodynamic lubrication (EHL) model based on the… read more here.
Keywords: helical gears; wear depth; tooth surface; lubrication ... See more keywords