Sign Up to like & get
recommendations!
1
Published in 2018 at "International Journal of Mechanical Sciences"
DOI: 10.1016/j.ijmecsci.2018.04.046
Abstract: Abstract The purpose of this paper is to establish the relationship between dynamic viscoelastic friction and wear. Friction and wear mechanisms were analysed by dynamically monitoring the viscoelastic slippage and temperature of the friction interface.…
read more here.
Keywords:
viscoelastic friction;
loss factor;
friction;
wear friction ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Journal of the Mechanical Behavior of Biomedical Materials"
DOI: 10.1016/j.jmbbm.2018.09.021
Abstract: PEEK-OPTIMA™ is being considered as an alternative bearing material to cobalt chrome in the femoral component of total knee replacement to provide a metal-free implant. The aim of this study was to investigate the influence…
read more here.
Keywords:
protein;
temperature;
peek optima;
wear friction ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2024 at "Physica Scripta"
DOI: 10.1088/1402-4896/ad5fc8
Abstract: Zinc Dialkyl Dithiophosphate (ZDDP) is widely used in internal combustion engine lubricating oil, which forms tribofilm and effectively blocks the direct contact of the material interface. Tribofilm plays an important role in wear resistance and…
read more here.
Keywords:
tribofilm;
impact tribofilm;
lubrication;
friction ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2023 at "Industrial Lubrication and Tribology"
DOI: 10.1108/ilt-11-2022-0350
Abstract: Purpose This paper aims to determine a suitable anti-wear and friction-reducing compounding additive for lithium greases (LG) by investigating the effects of three single additives potassium borate (PB), zinc dialkyl dithiophosphate and molybdenum dialkyl dithiophosphate…
read more here.
Keywords:
anti wear;
lithium greases;
friction reducing;
friction ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2022 at "Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology"
DOI: 10.1177/13506501211062540
Abstract: The present study is an endeavor to investigate the wear and friction behavior of Ti6Al4V against alumina (Al2O3) using a pin-on-disc tribometer at room temperature. The tests were performed for a given range of loads…
read more here.
Keywords:
optimization tribological;
using taguchi;
tribological parameters;
friction ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2022 at "Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology"
DOI: 10.1177/13506501221092255
Abstract: Fibre metal laminates (FMLs) are used to make lugs and cargo doors in the aviation industry. In both the assembly and service of aircraft, friction and wear are unavoidable. This paper explores the experimental and…
read more here.
Keywords:
statistical evaluation;
metal laminates;
friction;
wear friction ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2021 at "Energies"
DOI: 10.3390/en14113238
Abstract: The following paper describes research on vehicle suspension elements: the ball joints. The worn surface roughness of selected ball pins and their bearings was compared in terms of vehicle mileage, utilization period, and car model.…
read more here.
Keywords:
ball joint;
friction passenger;
ball;
ball joints ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2024 at "Lubricants"
DOI: 10.3390/lubricants12110368
Abstract: In this study, the dry sliding characteristics of a Ti3SiC2/Ti5Si3 matrix reinforced with different TiC contents against a 100Cr6 steel ball were investigated. The composites were fabricated using the spark plasma sintering method with Ti,…
read more here.
Keywords:
tic reinforced;
100cr6 steel;
wear friction;
ti3sic2 ti5si3 ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2025 at "Lubricants"
DOI: 10.3390/lubricants13090423
Abstract: (1) Background: Developing fully bio-based lubricating greases requires eco-friendly alternatives to conventional harmful components. This study highlights unmodified nanocellulose as an effective structuring agent in vegetable oils, enabling 100% bio-based formulations. (2) Methods: Three bio-based…
read more here.
Keywords:
friction behavior;
cellulose nanofibers;
cnf;
based biogreases ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2022 at "Materials"
DOI: 10.3390/ma15186312
Abstract: This paper presents the results of tests on the railway disc brake with regard to the weight wear of friction pads. The tests were carried out at a certified brake test bench where the friction-mechanical…
read more here.
Keywords:
friction;
wear friction;
friction pads;
pad ... See more keywords
Sign Up to like & get
recommendations!
2
Published in 2022 at "Polymers"
DOI: 10.3390/polym15010188
Abstract: Non-exhaust brake dust and pollution arising from metal, semi-metal, and ceramic brake pads have made recent research consider their replacement by potential natural fibers such as hemp, flax, sisal, etc. These natural fibers are lightweight,…
read more here.
Keywords:
pad material;
brake pad;
wear friction;
brake ... See more keywords