Tensile properties and wear resistance of epoxy nanocomposites reinforced with cellulose nanofibers
Sign Up to like & getrecommendations! Published in 2017 at "Polymer Bulletin"
DOI: 10.1007/s00289-017-2142-8
Abstract: Cellulose nanofibers (CNFs) were prepared from sugarcane bagasse and used as reinforcement in epoxy nanocomposites. To obtain CNFs, the cellulose was bleached with sodium chlorite, hydrothermally hydrolyzed with 5% w/v oxalic acid under pressure of 800… read more here.
Keywords: wear resistance; cellulose nanofibers; tensile properties; properties wear ... See more keywords
Use of Radioactive Beams of 7Be Nuclei to Study the Wear Resistance of Materials
Sign Up to like & getrecommendations! Published in 2017 at "Atomic Energy"
DOI: 10.1007/s10512-017-0279-z
Abstract: This work is devoted to the use of beams of radioactive nuclei for applied purposes – to study the wearresistance of materials used in different industries. The crux of the method is that the radioactive… read more here.
Keywords: wear resistance; nuclei; use radioactive; radioactive beams ... See more keywords
Structure and Wear Resistance of VC–FeCr and VC–FeCrСо Coatings Obtained by Supersonic Flame Spraying
Sign Up to like & getrecommendations! Published in 2018 at "Materials Science"
DOI: 10.1007/s11003-018-0152-9
Abstract: We study the wear resistance of the coatings sprayed by the supersonic flame (HVOF) and plasma methods in dynamic vacuum from VC–FeCr and VC–FeCrCo powders obtained by mechanical alloying. The coatings were sprayed by using… read more here.
Keywords: wear resistance; times higher; resistance; fecr ... See more keywords
Abrasive Wear Resistance of Alloyed Electric-Arc Coatings from Flux-Cored Wires
Sign Up to like & getrecommendations! Published in 2018 at "Materials Science"
DOI: 10.1007/s11003-018-0154-7
Abstract: We study the structure, abrasive and gas-abrasive wear resistances of electric-arc coatings from fluxcored wires of domestic and TAFA, Praxair, EnDoTec DO, and Castolin-EuTronic leading foreign companies at room and elevated temperatures. It is shown… read more here.
Keywords: abrasive wear; arc coatings; wear resistance; electric arc ... See more keywords
Improving Wear Resistance of Agricultural Machine Components by Applying Hard-Alloy Thick-Layer Coatings Using Plasma Surfacing
Sign Up to like & getrecommendations! Published in 2017 at "Metallurgist"
DOI: 10.1007/s11015-017-0443-7
Abstract: The most effective method for improving wear resistance of rapidly wearing agricultural machine components reacting under operating conditions with an abrasive soil medium is application of hard alloy coatings by surfacing. The thickness of a… read more here.
Keywords: alloy; wear resistance; improving wear; applying hard ... See more keywords
Use of Cryogenic Treatment to Improve Profile-Bending Roll Wear Resistance
Sign Up to like & getrecommendations! Published in 2017 at "Metallurgist"
DOI: 10.1007/s11015-017-0524-7
Abstract: The possibility of using cryogenic treatment technology for tool steel of grade Kh12VMF in preparing rolls for a profile-bending mill is analyzed. The nature of the effect of cryogenic treatment on the structure is considered:… read more here.
Keywords: wear resistance; cryogenic treatment; treatment; use cryogenic ... See more keywords
Effect of Zn and Mn Additions on the Wear Resistance of Cast Alloy Mg – 5% Al – 1% Si
Sign Up to like & getrecommendations! Published in 2017 at "Metal Science and Heat Treatment"
DOI: 10.1007/s11041-017-0121-1
Abstract: The effect of additions of Zn and Mn (from 0.5 to 4%) on the microstructure of alloy Mg – 5% Al – 1% Si is studied by the methods of x-ray diffractometry and light and… read more here.
Keywords: wear resistance; additions wear; alloy; effect additions ... See more keywords
Effect of Isothermal Bainitic Quenching on Rail Steel Impact Strength and Wear Resistance
Sign Up to like & getrecommendations! Published in 2017 at "Metal Science and Heat Treatment"
DOI: 10.1007/s11041-017-0144-7
Abstract: The effect of heat treatment regimes on hardness, impact strength, and wear resistance of rail steel for high-speed tracks (rail quality category R350HT) is studied. Analysis of steel properties with a different structure is compared:… read more here.
Keywords: wear resistance; steel; strength wear; impact strength ... See more keywords
Structure and Wear Resistance of Nitrocarburized Medium-Carbon Steels
Sign Up to like & getrecommendations! Published in 2018 at "Metal Science and Heat Treatment"
DOI: 10.1007/s11041-018-0202-9
Abstract: The methods of optical and scanning electron microscopy are used to study the structure and phase composition of nitrocarburized layer in medium-carbon steels alloyed with manganese, chromium and nickel. Transmission electron microscopy is applied to… read more here.
Keywords: medium carbon; carbon steels; microscopy; wear resistance ... See more keywords
Corrosion-Wear Resistance and Interfacial Morphologies of Novel Fe–Cr–B Cast Steels in Molten Aluminum
Sign Up to like & getrecommendations! Published in 2018 at "Tribology Letters"
DOI: 10.1007/s11249-018-1066-2
Abstract: In order to improve the corrosion–wear resistance properties of steels in molten aluminum, novel Fe–Cr–B cast steels with different boron concentrations were prepared. The steels were investigated at 750 °C for 0.5 h using a ring-block corrosion–wear… read more here.
Keywords: wear resistance; corrosion wear; steels molten; corrosion ... See more keywords
Building-Direction Dependence of Wear Resistance of Selective Laser Melted AISI 316L Stainless Steel Under Quasi-stationary Condition
Sign Up to like & getrecommendations! Published in 2020 at "Tribology Letters"
DOI: 10.1007/s11249-020-01316-7
Abstract: This study aims at exploring the wear performance of AISI 316L stainless steel fabricated via selective laser melting along different directions with respect to the building direction and via post annealing. Here, the wear resistance… read more here.
Keywords: selective laser; direction; laser; wear resistance ... See more keywords