Assessing the effects of oyster/kelp weight ratio on water column properties: an experimental IMTA study at Sanggou Bay, China
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Oceanology and Limnology"
DOI: 10.1007/s00343-019-9109-6
Abstract: Integrated Multi-Trophic Aquaculture (IMTA) is an effective method for sustainable aquaculture as species from different trophic levels could reduce negative effects from fed species in the environment. A proper proportion of different trophic species in… read more here.
Keywords: aquaculture; water; oyster kelp; weight ratio ... See more keywords
Influence of surface modification with nitric acid on electrochemical performance of agroindustrial waste-based activated carbon
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-018-9132-y
Abstract: Two activated carbons (ACs) were superficially modified with nitric acid (HNO3). The ACs were obtained by chemical activation of palm kernel shell, the first one with KOH at a KOH/AC weight ratio of 2/1 and… read more here.
Keywords: nitric acid; influence; weight ratio; spectroscopy ... See more keywords
Rh/CeO2+Pt/Ba/Mn/Al2O3 model NSR catalysts: Effect of Rh/Pt weight ratio
Sign Up to like & getrecommendations! Published in 2021 at "Catalysis Communications"
DOI: 10.1016/j.catcom.2021.106322
Abstract: Abstract A series of model NOx storage-reduction (NSR) catalysts with different Rh/Pt weight ratios were prepared independently by wet impregnation and then mechanically mixed to investigate the effect of the Rh/Pt weight ratio on the… read more here.
Keywords: effect weight; nsr catalysts; model; effect ... See more keywords
Influence of the preparation method and ZnO/(ZnO + TiO2) weight ratio on the physicochemical and photocatalytic properties of ZnO-TiO2 nanomaterials
Sign Up to like & getrecommendations! Published in 2019 at "Catalysis Today"
DOI: 10.1016/j.cattod.2018.01.016
Abstract: Abstract In this work, ZnO-TiO2 nanomaterials with various ZnO/(ZnO + TiO2) weight ratios (0.1–0.9) were synthesized by using sol-gel and precipitation methods The influence of the ZnO weight ratio (R) and the preparation method on the structural,… read more here.
Keywords: tio2 nanomaterials; preparation method; zno tio2; weight ratio ... See more keywords
Mechanical and electrical properties of Cu-Steel bimetallic porous composite with a double-helix entangled structure
Sign Up to like & getrecommendations! Published in 2021 at "Composite Structures"
DOI: 10.1016/j.compstruct.2020.112886
Abstract: Abstract Cu-steel bimetallic porous composite structures can be used as lightweight, damping, and electro-conductive elements in critical environments where traditional single materials become ineffective. In the present work, a novel Cu-steel bimetallic porous composite with… read more here.
Keywords: steel bimetallic; porous composite; weight ratio; bimetallic porous ... See more keywords
Enhancement of cadmium adsorption by EPS-montmorillonite composites.
Sign Up to like & getrecommendations! Published in 2019 at "Environmental pollution"
DOI: 10.1016/j.envpol.2019.06.071
Abstract: Extracellular polymeric substance (EPS)-mineral associations occur naturally in soil and sediments, and they might play crucial roles in heavy metals immobilization. In this study, EPS-montmorillonite composites with different weight ratios were characterized and investigated for… read more here.
Keywords: adsorption; weight ratio; eps montmorillonite; cadmium ... See more keywords
Fabrication, modeling and optimization of lyophilized advanced platelet rich fibrin in combination with collagen-chitosan as a guided bone regeneration membrane.
Sign Up to like & getrecommendations! Published in 2019 at "International journal of biological macromolecules"
DOI: 10.1016/j.ijbiomac.2018.12.078
Abstract: In this study, lyophilized advanced platelet rich fibrin (A-PRF) was used in combination with collagen-chitosan membrane for the first time to combine advantages of both collagen and A-PRF membranes. Response surface methodology (RSM) was used… read more here.
Keywords: collagen; prf concentration; weight ratio; chit col ... See more keywords
A hydraulic actuator for joint robots with higher torque to weight ratio
Sign Up to like & getrecommendations! Published in 2022 at "Robotica"
DOI: 10.1017/s0263574722001576
Abstract: Abstract Joint actuators with a compact size and high power density are necessary for robots with rotating joints, making the hydraulic actuator (HyA) an ideal actuator candidate. This paper presents a joint HyA with the… read more here.
Keywords: hydraulic actuator; weight ratio; torque weight; actuator ... See more keywords
Size effect of hybrid carbon nanofillers on the synergetic enhancement of the properties of HDPE-based nanocomposites
Sign Up to like & getrecommendations! Published in 2021 at "Nanotechnology"
DOI: 10.1088/1361-6528/abf968
Abstract: High-density polyethylene (HDPE)-based hybrid nanocomposites containing graphene nanoplatelets (GnPs) and multiwall carbon nanotubes (MWCNTs) were fabricated using melt mixing followed by compression molding. The influences of size and weight ratio of both carbon-based nanofillers on… read more here.
Keywords: carbon; weight ratio; ratio; gnps ... See more keywords
Design and Fabrication of a Low-Cost Silicone and Water-Based Soft Actuator with a High Load-to-Weight Ratio.
Sign Up to like & getrecommendations! Published in 2020 at "Soft robotics"
DOI: 10.1089/soro.2019.0186
Abstract: Traditional actuators, such as motors as well as hydraulic or pneumatic artificial muscles, demonstrate excessive noise, a heavy weight, and a large size, which limit their practical application in many areas. Therefore, for many decades,… read more here.
Keywords: high load; weight ratio; low cost; load ... See more keywords
Dionysian Hard Sphere Packings Are Mechanically Stable at Vanishingly Low Densities.
Sign Up to like & getrecommendations! Published in 2022 at "Physical review letters"
DOI: 10.1103/physrevlett.128.018002
Abstract: High strength-to-weight ratio materials can be constructed by either maximizing strength or minimizing weight. Tensegrity structures and aerogels take very different paths to achieving high strength-to-weight ratios but both rely on internal tensile forces. In… read more here.
Keywords: strength; high strength; strength weight; weight ratio ... See more keywords