Delta (δ) Ferrite Formation in the Welds of Aluminized 9Cr-1Mo Steels
Sign Up to like & getrecommendations! Published in 2019 at "Metallography, Microstructure, and Analysis"
DOI: 10.1007/s13632-019-00528-1
Abstract: AbstractDelta (δ) ferrite phase has several detrimental effects on mechanical properties such as toughness, creep, impact and ductility. It is necessary to examine δ-ferrite content in the weld zone of aluminized coated steels. This manuscript… read more here.
Keywords: delta ferrite; microscopy; ferrite formation; weld zone ... See more keywords
Distribution of rubber particles in the weld zone of fused filament fabricated acrylonitrile butadiene styrene and the impact on weld strength
Sign Up to like & getrecommendations! Published in 2021 at "Additive manufacturing"
DOI: 10.1016/j.addma.2021.101964
Abstract: Abstract Fused filament fabrication (FFF) is a common additive manufacturing method for polymers that has been widely adopted due to its low cost and ease of use. However, FFF remains limited in high performance applications… read more here.
Keywords: weld strength; butadiene styrene; distribution; weld zone ... See more keywords
Microstructure and strain rate sensitivity behavior of SM490 structural steel weld zone investigated using indentation
Sign Up to like & getrecommendations! Published in 2019 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2019.02.013
Abstract: Abstract In this study, a series of optical microscope examinations, constant loading rate indentation (CLR), and creep indentation (CI) tests were performed on room temperature to investigate the strain rate sensitivity behavior of the SM490… read more here.
Keywords: indentation; rate sensitivity; rate; weld zone ... See more keywords
Tribocorrosion of friction-stir-welded Ti6AL4V in 3.5% NaCl aqueous solution
Sign Up to like & getrecommendations! Published in 2017 at "Wear"
DOI: 10.1016/j.wear.2017.08.004
Abstract: Abstract Ti6Al4V has extensive uses in the marine and biomedical industry. In some of these applications, corrosion is present with additional mechanical wear. Thus, the corrosion, wear and their synergistic properties were investigated in applications… read more here.
Keywords: friction; weld zone; friction stir; solution ... See more keywords
Study on the Corrosion Behaviours of X80 Pipeline Steel Joints Fabricated via Hot-Wire Tungsten Inert Gas Welding
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Electrochemical Science"
DOI: 10.20964/2019.03.72
Abstract: X80 pipeline steel joints were fabricated via hot-wire tungsten inert gas welding by using ER70S-G wire with a diameter of 1.2 mm. The microstructures of the welded joints were analysed by using metallographic microscopy. Weight-loss… read more here.
Keywords: microscopy; pipeline steel; x80 pipeline; weld zone ... See more keywords
The Effect of Novel Complex Treatment of Annealing and Sandblasting on the Microstructure and Performance of Welded TA1 Titanium Plate
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16062149
Abstract: The welding titanium cathode roller has the obvious advantages of low cost, high efficiency, and no diameter restriction. Unfortunately, the longitudinal weld on the cathode roller adversely impacts the quality of the electrolytic copper foil… read more here.
Keywords: weld zone; microstructure weld; novel complex; microstructure ... See more keywords
Effect of Post-Welding Aging Treatment on the Microstructure and High-Temperature Properties of Inertia Friction Welded GH4065A Joint
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16103639
Abstract: In this study, post-welding aging treatments were applied to a novel Ni-based superalloy GH4065A inertia friction welding (IFW) joint to improve its high-temperature properties. The effect of aging treatment on the microstructure and creep resistance… read more here.
Keywords: base material; weld zone; aging treatment; temperature ... See more keywords