The Effect of Heat Treatment and the Volume Fraction of the Alpha Phase on the Workability of Ti-5Al-5Mo-5V-3Cr Alloy
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04281-y
Abstract: Ti-5Al-5Mo-5V-3Cr (Ti-5553) is a metastable beta titanium alloy with high hardenability, good ductility, and high strength. Different microstructures with different volume fractions and distribution of α phase can be produced in this alloy by suitable… read more here.
Keywords: phase; alloy; volume; volume fraction ... See more keywords
Hot Workability of the as-Cast 21Cr Economical Duplex Stainless Steel Through Processing Map and Microstructural Studies Using Different Instability Criteria
Sign Up to like & getrecommendations! Published in 2017 at "Acta Metallurgica Sinica (English Letters)"
DOI: 10.1007/s40195-017-0647-7
Abstract: To develop a fundamental understanding of the flow behavior and optimal hot workability parameters of this material, the hot workability and deformation mechanisms of the as-cast 21Cr EDSS were studied using processing map technology combined… read more here.
Keywords: hot workability; cast 21cr; workability cast; workability ... See more keywords
Application and use of different aluminium alloys with respect to workability, strength and welding parameter optimization
Sign Up to like & getrecommendations! Published in 2020 at "Ain Shams Engineering Journal"
DOI: 10.1016/j.asej.2020.05.013
Abstract: Abstract Aluminium alloys are widely used in the fields of electric module packaging, electronic technology, automotive body structure, wind and solar energy management, due to the advantages of high specific strength, high processability, predominantly anti-erosion,… read more here.
Keywords: strength; aluminium; study; workability ... See more keywords
Investigation of concrete workability through characterization of aggregate gradation in hardened concrete using X-ray computed tomography
Sign Up to like & getrecommendations! Published in 2019 at "Cement and Concrete Composites"
DOI: 10.1016/j.cemconcomp.2019.02.008
Abstract: Abstract Concrete mixtures with different aggregate gradations and workability were prepared and X-ray computed tomography (XCT) is used to study the aggregate packing in hardened concrete. The workability of the mixtures was measured and then… read more here.
Keywords: workability; ray computed; computed tomography; concrete workability ... See more keywords
Effect of raw clay type, fineness, water-to-cement ratio and fly ash addition on workability and strength performance of calcined clay – Limestone Portland cements
Sign Up to like & getrecommendations! Published in 2017 at "Cement and Concrete Research"
DOI: 10.1016/j.cemconres.2017.08.003
Abstract: Abstract Workability and strength performance of blended cements with different replacement levels have been investigated for two calcined clay mineral additions (1:1 and 2:1 type) and mixtures with limestone. The effect of fly ash addition… read more here.
Keywords: strength; addition; calcined clay; workability ... See more keywords
Effects of epoxy, hardener, and diluent types on the workability of epoxy mixtures
Sign Up to like & getrecommendations! Published in 2018 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2017.10.008
Abstract: Abstract Three types of epoxy resins, namely, diglycidyl ether of bisphenol A and F, and a third obtained by mixing the two resins, and three types of reactive diluents, based on glycidylether, were used to… read more here.
Keywords: epoxy hardener; hardener diluent; workability; epoxy mixtures ... See more keywords
The effects of graphene oxide-silica nanohybrids on the workability, hydration, and mechanical properties of Portland cement paste
Sign Up to like & getrecommendations! Published in 2021 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2020.121016
Abstract: Abstract Although graphene-based materials have attracted much attention as nanoreinforcements for cementitious materials, their effectiveness is significantly dependent on their dispersibility in cement matrix. In particular, graphene hybridization (e.g. with silica) has shown considerable potential… read more here.
Keywords: portland cement; workability; graphene oxide; cement paste ... See more keywords
Nanocement/poly(vinyl alcohol) composites for endodontic applications
Sign Up to like & getrecommendations! Published in 2020 at "Materials Chemistry and Physics"
DOI: 10.1016/j.matchemphys.2020.123337
Abstract: Abstract Nano Fast Cement, NFC, is a nanocomposite with short setting time for repairing root teeth canals as an alternative to Mineral Trioxide Aggregate. The downside of this new tooth restorative material is the poor… read more here.
Keywords: strength; workability; vinyl alcohol; pva ... See more keywords
Sodium hexametaphosphate (SHMP)-amended calcium bentonite for slurry trench cutoff walls: workability and microstructure characteristics
Sign Up to like & getrecommendations! Published in 2018 at "Canadian Geotechnical Journal"
DOI: 10.1139/cgj-2017-0291
Abstract: This study aims to investigate workability and microstructural characteristics of sodium hexametaphosphate (SHMP)-treated calcium bentonite (Ca-bentonite) as a potential material for soil–bentonite... read more here.
Keywords: sodium hexametaphosphate; hexametaphosphate shmp; workability; calcium bentonite ... See more keywords
Study of the Compressive Strength of Mortars as a Function of Material Composition, Workability, and Specimen Geometry
Sign Up to like & getrecommendations! Published in 2020 at "Modelling and Simulation in Engineering"
DOI: 10.1155/2020/1676190
Abstract: In the present work, the statistical dispersion of the mortar compressive strength as a function of the geometric parameters of the specimens as well as the effect of the mortar workability difference on the compressive… read more here.
Keywords: strength; strength mortars; workability; geometry ... See more keywords
Theoretical-Experimental Analysis of the Workability of the Ni50Cr45N0.6 alloy
Sign Up to like & getrecommendations! Published in 2017 at "Archives of Metallurgy and Materials"
DOI: 10.1515/amm-2017-0008
Abstract: In this paper, the results of investigations into, and of the analyses of, the hot deformation behaviour of the Ni50Cr45N0.6 alloy were presented. Compression tests were conducted on a Gleeble 3800 thermo-mechanical simulator within the… read more here.
Keywords: flow instability; theoretical experimental; workability; strain rate ... See more keywords