In vivo study of the efficacy, biosafety, and degradation of a zinc alloy osteosynthesis system.
Sign Up to like & getrecommendations! Published in 2019 at "Acta biomaterialia"
DOI: 10.1016/j.actbio.2019.05.001
Abstract: In this study, a comprehensive analysis of a novel zinc alloy osteosynthesis system in a canine mandibular fracture model is presented. The efficacy of the system was compared for PLLA (poly-l-lactic acid) and titanium materials… read more here.
Keywords: alloy; osteosynthesis system; zinc alloy;
Synergistic effect of corrosion and wear of the 316 stainless steel in molten zinc alloy at 460 °C
Sign Up to like & getrecommendations! Published in 2020 at "Corrosion Science"
DOI: 10.1016/j.corsci.2019.108411
Abstract: Abstract The failure of 316 stainless steel under tribo-corrosion in molten zinc alloy (Zn-0.2Al, wt%) at 460 °C was investigated and compared with corrosion or the sole wear. In the absence of wear, intact Fe2Al5Znx layer… read more here.
Keywords: zinc alloy; stainless steel; corrosion; steel ... See more keywords
Production and anisotropic compressibility of 304 stainless steel fiber/ZA8 zinc alloy interpenetrating phase composites
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.07.180
Abstract: Abstract Novel interpenetrating phase composites (IPCs) are produced by infiltrating ZA8 zinc alloy into a variety of possible fibrous preforms via squeeze casting. The preform with spatial network structure is fabricated by compaction following with… read more here.
Keywords: fiber; phase composites; interpenetrating phase; zinc alloy ... See more keywords
Biocompatibility and biodegradation studies of a commercial zinc alloy for temporary mini-implant applications
Sign Up to like & getrecommendations! Published in 2017 at "Scientific Reports"
DOI: 10.1038/s41598-017-15873-w
Abstract: In this study, the biocompatibility and in vitro degradation behaviour of a commercial zinc-based alloy (Zn-5 Al-4 Mg) were evaluated and compared with that of pure zinc for temporary orthopaedic implant applications. Biocompatibility tests were conducted using… read more here.
Keywords: degradation; zinc; biocompatibility; pure zinc ... See more keywords
Wear behavior of electrodeposited nickel coating on ZP5 zinc alloy
Sign Up to like & getrecommendations! Published in 2020 at "Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications"
DOI: 10.1177/1464420720933980
Abstract: Nickel coating on zinc alloy is quite promising for the achievement of an additional wear improvement in corrosive environment. To investigate this point, block-on-ring tests were carried out. Blocks measuring 5 × 5×20 mm3 were obtained from… read more here.
Keywords: nickel coating; behavior electrodeposited; wear behavior; zinc alloy ... See more keywords
Photoluminescent Coatings on Zinc Alloy Prepared by Plasma Electrolytic Oxidation in Aluminate Electrolyte
Sign Up to like & getrecommendations! Published in 2023 at "Coatings"
DOI: 10.3390/coatings13050848
Abstract: Thick ZnO/ZnAl2O4 coatings were synthesized on zinc alloy Z1 substrates through plasma electrolytic oxidation (PEO) for different anodization times. The prepared coatings were characterized by scanning SEM, XRD, diffuse reflectance and photoluminescence spectroscopy in order… read more here.
Keywords: znal2o4; plasma electrolytic; spectroscopy; electrolytic oxidation ... See more keywords