Tribological behavior of the low‐concentration boric acid and ZDDP lubricating oil mixtures
Sign Up to like & getrecommendations! Published in 2019 at "Surface and Interface Analysis"
DOI: 10.1002/sia.6656
Abstract: Zinc dithiophosphate (ZDDP)‐free environmental friendly lubricating oil research studies have gained importance due to the governmental regulations over the last decade. In this study, low concentration boric acid‐base oil and ZDDP‐base oil mixtures were investigated… read more here.
Keywords: lubricating oil; zddp; boric acid; oil mixtures ... See more keywords
Recycling of used lubricating oil by solvent extraction: experimental results, Aspen Plus simulation and feasibility study
Sign Up to like & getrecommendations! Published in 2020 at "Clean Technologies and Environmental Policy"
DOI: 10.1007/s10098-020-01893-0
Abstract: This study investigates the recycling of used lubricating oil (ULO) by solvent extraction using a ternary solvent consisting of 2-propanol, 1-butanol and methyl ethyl ketone (MEK) followed by a vacuum distillation unit. In order to… read more here.
Keywords: extraction; study; solvent; process ... See more keywords
Regeneration of the waste lubricating oil based upon flyash adsorption / solvent extraction
Sign Up to like & getrecommendations! Published in 2019 at "Environmental Science and Pollution Research"
DOI: 10.1007/s11356-019-07389-9
Abstract: In order to explore the high value-added utilization of flyash adsorption in regenerating waste lubricating oil, the main factors related to the flyash adsorption was investigated by the single-factor tests, and then the optimum process… read more here.
Keywords: adsorption; solvent extraction; flyash adsorption; waste lubricating ... See more keywords
Studies of antioxidant performance of amine additives in lubricating oil using 3D-QSAR
Sign Up to like & getrecommendations! Published in 2017 at "Science China Technological Sciences"
DOI: 10.1007/s11431-016-0560-9
Abstract: Available model of 3D-quantitative structure-activity relationship (3D-QSAR, the method of TopomerCoMFA) has been used to establish relationship between antioxidant performances of lubricating oil (trimethylolpropane trioleate, TMPTO) with 15 kinds of amine additives and its molecular… read more here.
Keywords: antioxidant performance; lubricating oil; amine additives;
Study on the Influence of Lubrication Cooling State on Sliding Shoe and Guiding Plate of Fracturing Pump
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Failure Analysis and Prevention"
DOI: 10.1007/s11668-019-00783-y
Abstract: During the operation of the fracturing pump, the friction between the sliding shoe and the guiding plate generates heat, which can rise the temperature of the friction surface, causing the fracturing pump to fail. Generally,… read more here.
Keywords: fracturing pump; guiding plate; sliding shoe; oil ... See more keywords
Effects of lubricating oil on the performance of a semi-hermetic twin screw refrigeration compressor
Sign Up to like & getrecommendations! Published in 2017 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2016.10.038
Abstract: Lubricating oil is often employed in a twin-screw refrigeration compressor for lubricating bearings, sealing leakage paths, cooling refrigerant gas and regulating capacity. In this paper, the effect of lubricating oil on the performance of a… read more here.
Keywords: compressor; twin screw; screw refrigeration; performance ... See more keywords
Effects of the lubricating oil and diesel mixture combustion on the oxidation and microphysical properties of particulate matter
Sign Up to like & getrecommendations! Published in 2020 at "Energy Reports"
DOI: 10.1016/j.egyr.2020.01.004
Abstract: Abstract This research focuses on the diesel and diesel/oil mixed fuel combustion particles as the research object and analyzes the characteristics of the two kinds of fuel oil under different parameters. The characteristics of the… read more here.
Keywords: effects lubricating; combustion; particulate matter; oil ... See more keywords
Anti-corrosion and wear resistance properties of polymer composite coatings: Effect of oily functional fillers
Sign Up to like & getrecommendations! Published in 2018 at "Journal of The Taiwan Institute of Chemical Engineers"
DOI: 10.1016/j.jtice.2018.01.031
Abstract: Abstract We herein report the development of carbon-modified porous fillers that function as micro-reservoirs to store lubricating oil as a low-friction and anticorrosive agent in a composite coating. These novel oily particles were added to… read more here.
Keywords: wear resistance; anti corrosion; lubricating oil;
Detection oxidative degradation in lubricating oil under storage conditions using digital images and chemometrics
Sign Up to like & getrecommendations! Published in 2019 at "Microchemical Journal"
DOI: 10.1016/j.microc.2019.03.087
Abstract: Abstract Early detection of the degradation process of lubricating oil caused by storage condition can prevent extensive losses for rural producers and mining companies, which operate far from urban centers and need to purchase large… read more here.
Keywords: digital images; oil; storage; degradation ... See more keywords
Spectroscopic analysis of synthetic lubricating oil
Sign Up to like & getrecommendations! Published in 2017 at "Tribology International"
DOI: 10.1016/j.triboint.2017.04.011
Abstract: Abstract Analysis and evaluation of the degradation rate of the synthetic lubricating oil in diesel vehicle engines under the operating effect were carried out by exploiting: Electron Paramagnetic Resonance (EPR) and Infrared Fourier Transform (FTIR).… read more here.
Keywords: degradation; analysis; synthetic lubricating; oil ... See more keywords
Nanosized copper powders prepared by gel-casting method and their application in lubricating oil
Sign Up to like & getrecommendations! Published in 2018 at "Transactions of Nonferrous Metals Society of China"
DOI: 10.1016/s1003-6326(18)64756-9
Abstract: Abstract Nanosized copper powders were prepared by a gel-casting method using copper nitrate, acrylamide (AM) and N, N′-methylenebisacrylamide (MBAM) as the main raw materials. The as-prepared copper powders were characterized by X-ray diffractometry and scanning… read more here.
Keywords: nanosized copper; copper powders; copper; powders prepared ... See more keywords